Avancerad sökning

Visar resultat 1 - 5 av 229 avhandlingar som matchar ovanstående sökkriterier.

  1. 1. CFD modelling of small biomass-fired boilers

    Författare :Anders Lönnermark; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; simulation; combustion; biomass; modelling; emissions; CFD; reaction rate; mixing; boiler;

    Sammanfattning : .... LÄS MER

  3. 2. Mass transfer and slag-metal reaction in ladle refining : a CFD approach

    Författare :Eva Ramström; Du Sichen; Mselly Nozotta; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; reoxidation; desulphurisation; CFD; ladle treatment; model; Other materials science; Övrig teknisk materialvetenskap;

    Sammanfattning :   In order to optimise the ladle treatment mass transfer modelling of aluminium addition and homogenisation time was carried out. It was stressed that incorporating slag-metal reactions into the mass transfer modelling strongly would enhance the reliability and amount of information to be analyzed from the CFD calculations. LÄS MER

  4. 3. ANALYZING THE HYDRO DYNAMICS AND THE CHEMICAL REACTIONS IN PULP DIGESTER SYSTEMS USING CFD MODELLING

    Författare :Bijan Pourian; Erik Dahlquist; Laszlo Fuchs; Mälardalens högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CFD; MODELLING; SIMULATION; PULP; DIGESTER. CHEMICAL; MULTIPHASE; Cellulose and paper engineering; Cellulosa- och pappersteknik; Energy- and Environmental Engineering; energi- och miljöteknik;

    Sammanfattning : The aim of this thesis is to use differential analysis and finite volume method (FVM) to model and analyze a continuous pulp digester in order to create a detailed picture of the flow behaviour and chemical reactions in the digester. This information will be used to optimize wood chip flow and reactions and to diagnose and avoid faults such as hang-ups and channelling. LÄS MER

  5. 4. Metal fusion using pulsed GasMetal Arc : Melt pool modellingand CFD simulation

    Författare :Pradip Aryal; Isabelle Choquet; Muriel Carin; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Gas metal arc; Electromagnetic force modelling; Free surface deformation; Computational Fluid Dynamics; OpenFOAM; Gasmetallbågsvetsning; Svetsläge; Elektromagnetiskkraftmodellering; Smältytans rörelser; Computational Fluid Dynamics; OpenFOAM; Production Technology; Produktionsteknik;

    Sammanfattning : Pulsed gas metal arc is a highly efficient technique used in manufacturing processes like welding and additive manufacturing. It offers high productivity and cost benefits but it is also prone to defect formation when process parameters are not properly controlled and optimized. LÄS MER

  7. 5. Vertical Display Cabinets in Supermarkets - Energy Efficiency and the Influence of Air Flows

    Författare :Monica Axell; RISE; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; display cabinet; model; simulation; supermarket; CFD; air curtain; energy; performance; air distribution; display case; infiltration;

    Sammanfattning : This thesis concerns investigations of the performance of vertical refrigerated display cabinets. Such cabinets are in widespread use and account for a considerable proportion of the energy used in shops. The open front is important for the shop-owner, who wants the chilled items in the cabinet to be well exposed and easily accessible. LÄS MER