Sökning: "CASTing"

Visar resultat 6 - 10 av 308 avhandlingar innehållade ordet CASTing.

1. 6. Formation of non-metallic inclusions and the possibility of their removal during ingot casting

   Författare :Lars Ragnarsson; Sichen Du; Carlo Mapelli; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Ingot casting; tool steel; inclusion; runner; refractory; erosion; casting powder; cold model; argon shroud; reoxidation; oxygen measurement; CFD; PIV; Metallurgical process engineering; Metallurgisk processteknik;

   Sammanfattning : The present study was carried out to investigate the formation and evolution of non-metallic inclusions during ingot casting. Emphasize have been on understanding the types of inclusions formed and developed through the casting process and on the development of already existing inclusions carried over from the ladle during casting. LÄS MER

3. 7. Cracking during Continuous Casting of Steels : Analysis tools and procedures to identify their causes on microalloyed steel slabs

   Författare :Rosa Maria Pineda Huitron; Esa Vuorinen; Pavel Ernesto Ramí­rez López; Maria Begoña Santillana; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Transverse corner cracks; Continuous Casting; Microalloyes steels; Secondary cooling; Cooling curves; Crack susceptibility; Materialteknik; Engineering Materials;

   Sammanfattning : Transverse corner cracks are one of the most common but complex defects formed in microalloyed steels during continuous casting (CC). Such cracks are detrimental because it leads to a loss in productivity with a great impact on environment, energy and economics for several steel making companies all over the world. LÄS MER

4. 8. Oscillation Mark Formation in Continuous Casting Processes

   Författare :Jessica Elfsberg; KTH; []
   Nyckelord :continuous casting; oscillation marks; steel; copper;

   Sammanfattning : .... LÄS MER

5. 9. Process development for investment casting of thin-walled components : Manufacturing of light weight components

   Författare :Mohsin Raza; Björn Fagerström; Jarfors Anders; Mälardalens högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Investment casting; fluidity; thin sections; porosity; grain structure; turbine blades and Niyama criterion; Innovation and Design; innovation och design;

   Sammanfattning : Manufacturing processes are getting more and more complex with increasing demands of advanced and light weight engineering components, especially in aerospace industry. The global requirements on lower fuel consumption and emissions are increasing the demands in lowering weight of cast components. LÄS MER

7. 10. The mechanisms of metal expansion penetration during solidification of grey cast iron

   Författare :Izudin Dugic; Preben Norgaard Hansén; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Grey cast iron; solidification; solidification modelling; graphite expansion; molar volume; casting simulation; thermal analysis; thermoanalysis cup; casting temperature; inoculation; inoculant; metal expansion penetration; eutectic cell size; primary austenite; austenite grain; TECHNOLOGY; TEKNIKVETENSKAP;

   Sammanfattning : The production of high quality castings requires the casting surface to be clean and free from defects. One type of defect often found is caused by metal penetration into the sand mould. LÄS MER