Sökning: "Angle of Repose"
Hittade 5 avhandlingar innehållade orden Angle of Repose.
1. Flow and Compression of Granulated Powders : The Accuracy of Discrete Element Simulations and Assessment of Tablet Microstructure
Sammanfattning : Simulations are powerful and important tools for gaining insight into powder processes. Ultimately, simulations have the potential to replace experiments. Thus, accurate models and insight into the essential factors for descriptions of powder behaviour are required. LÄS MER
2. Improved understanding of sublevel blasting : Determination of the extent of the compacted zone, its properties and the effects on caving
Sammanfattning : Sublevel caving (SLC) is a mass mining method relying on the flowability of the blasted material. The ore is blasted in slices against caved material which is mainly waste rock. The result of the confined blast is greatly influenced by the interaction between the blasted material and the caved material. LÄS MER
3. From torrefaction to gasification : Pilot scale studies for upgrading of biomass
Sammanfattning : Increasing the share of biomass, preferably by replacing fossil fuels, is one way to mitigate the present climate change. Fossil coal can be directly replaced by co-combustion of coal and biomass and fossil engine fuels (gasoline and diesel) could potentially partly be replaced by synthetic renewable fuels produced via entrained flow gasification of biomass. LÄS MER
4. Experiments and simulations on the mechanics of ice and snow
Sammanfattning : In this study, experiments and simulations were conducted to investigate ice and snow. The ice sintering force as a function of temperature, pressing force (contact load), contact duration, and particle size during the primary stage of sintering was formulated using experimental methods along with an approximate, semi-analytic, close-form solution. LÄS MER
5. Snow Contamination of Cars: Adhesive Particle Collisions with Exterior Surfaces
Sammanfattning : An ongoing challenge regarding autonomous vehicles is the obstruction of sensors by contaminants on exterior surfaces. This often occurs when driving in harsh weather conditions, where the contaminant can be, for example, water spray, dirt, or snow. LÄS MER