Sökning: "Andreas Olsson"

Visar resultat 1 - 5 av 19 avhandlingar innehållade orden Andreas Olsson.

1. 1. Analysis and improvement of risk assessment methodology for offshore energy installations : Aspects of environmental impact assessment and as-built subsea cable verification

   Författare :Andreas Olsson; Blekinge Tekniska Högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; DST; Decision Support Tools; subsea cables; statistical method; environmental risk; risk of accidents; Systemteknik; Systems Engineering;

   Sammanfattning : In the expansion of offshore sustainable energy systems, there is growing pressure on the environment and permit processes and the accumulation results in much higher total risk for accidents of future assets. Anticipating the problems at the design stage and improving verification is likely to increase energy development and reduce costs. LÄS MER

3. 2. Low Frequency Impact Sound in Timber Buildings : Transmission Measurements and Simulations

   Författare :Jörgen Olsson; Andreas Linderholt; Börje Nilsson; Carl Hopkins; Linnéuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Timber floors; FE-simulations; Light weight floors; Frequency response functions; Building acoustics; Byggteknik; Civil engineering;

   Sammanfattning : An increased share of multi-story buildings that have timber structures entails potential in terms of increased sustainability as well as human-friendly manufacturing and habitation. Timber buildings taller than two stories were prohibited in Europe until the 1990s due to fire regulations. In 1994, this prohibition was removed in Sweden. LÄS MER

4. 3. Modelling and strength grading of structural timber and glulam lamellae on the basis of optical scanning and dynamic excitation

   Författare :Andreas Briggert; Anders Olsson; Jan Oscarsson; Mikael Perstorper; Linnéuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fibre direction; finger joint; machine strength grading; knots; tracheid effect; Norway spruce; Byggteknik; Civil engineering;

   Sammanfattning : Machine strength grading of sawn timber is a sawmill process in which density, modulus of elasticity (MOE) and bending or tensile strength are predicted such that the timber can be assigned to strength classes. The predictions of these properties are performed using one or several so-called indicating properties (IPs), which represent a board property, or combination of board properties, measured non-destructively. LÄS MER

5. 4. Low Frequency Impact Sound in Timber Buildings : Simulations and Measurements

   Författare :Jörgen Olsson; Andreas Linderholt; Leif Kari; Linnéuniversitetet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Low-frequency; impact sound; light weight floor; timber joist floor; tapping machine; multi-storey timber building; frequency response functions.; Stegljud; Byggteknik; Civil engineering;

   Sammanfattning : An increased share of construction with timber is one possible way of achieving more sustainable and energy-efficient life cycles of buildings. The main reason is that wood is a renewable material and buildings require a large amount of resources. LÄS MER

7. 5. Constructing the adult learner : a governmentality analysis

   Författare :Andreas Fejes; Staffan Larsson; Ulf Olsson; David Hamilton; Linköpings universitet; []
   Nyckelord :SAMHÄLLSVETENSKAP; SOCIAL SCIENCES; lifelong learning; adult education; adult learner; governmentality; genealogy; policy analysis; livslångt lärande; vuxenutbildning; den vuxna studerande; styrningsrationalitet; governmentality; genealogi; policy analys; Education; Pedagogik;

   Sammanfattning : Syftet med denna avhandling är att studera hur den vuxna studerande konstrueras genom olika styrningstekniker inom Vuxenutbildning, Folkbildning och Högre utbildning. Vidare är syftet att analysera vad för styrningsrationalitet som både skapas genom och som skapar dessa praktiker. LÄS MER