Sökning: "Alloy 718"

Visar resultat 6 - 10 av 58 avhandlingar innehållade orden Alloy 718.

  1. 6. Machinability variations in Alloy 718 —With focus on machining of turbine components

    Författare :Pajazit Avdovic; Industriell Produktion; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; polar diagram; flank wear; ceramic tool; variation in material; tool wear; tool life; machinability; Inconel; Alloy 718; Machining; notch wear;

    Sammanfattning : In gas turbine engine, nickel base alloy, such as Alloy 718, accounts for almost half of the total material requirement. Nickel-base superalloys are used for gas turbine components mainly because of their outstanding strength and resistance to oxidation at high temperatures (> 550°C). LÄS MER

  3. 7. Process chain simulation of forming, welding and heat treatment of Alloy 718

    Författare :Joachim Steffenburg-Nordenström; Lars-Erik Svensson; Lars-Erik Lindgren; Fredrik Niklasson; Högskolan Väst; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Forming; Welding; Stress relieve annealing; Heat treatment; Finite Element Simulation; Manufacturing process chain; Alloy 718; Production Technology; Produktionsteknik; Manufacturing and materials engineering; Produktions- och materialteknik;

    Sammanfattning : Manufacturing of aero engine components requires attention to residual stress and final shape of the product in order to meet high quality product standards.This sets very high demands on involved manufacturing steps to meet design requirements. LÄS MER

  4. 8. Microstructure and property models of alloy 718 applicable for simulation of manufacturing processes

    Författare :Marie Anna Moretti; Lars-Erik Lindgren; Paul Åkerström; Jörgen Kajberg; Bijish Babu; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material characterisation; Material modelling; Alloy 718; Plasticity; Recrystallization; Hållfasthetslära; Solid Mechanics;

    Sammanfattning : This thesis focuses on experimental characterization, understanding and modelling of nickel-based alloy 718, for a large range of loading conditions. Alloy 718 is the most widely used nickel-based superalloy, due to its high strength, high corrosion resistance and excellent mechanical properties at high temperatures. LÄS MER

  5. 9. High strain rate deformation of Alloy 718, Influence of Microstructure on Mechanical Properties

    Författare :Joakim Johansson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Alloy 718; Adiabatic shear localisation; Split-Hopkinson; Johnson-Cook;

    Sammanfattning : Alloy 718 is a high temperature alloy, used where high temperature strength or oxidation resistance is required. As the alloy is precipitate heat treatable, it is possible to have a large variety of deformation and mechanical properties depending on microstructure. LÄS MER

  7. 10. ELECTRON BEAM MELTING OF ALLOY 718 - POWDER RECYCLING AND ITS EFFECT ON DEFECT FORMATION

    Författare :Hans Gruber; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; powder recycling; electron beam melting; oxide defects; Alloy 718; defect formation; powder degradation; additive manufacturing; non-metallic inclusions;

    Sammanfattning : As for any production process, the performance of additively manufactured components is ultimately dependent on the quality of the feedstock material. Consequently, for critical components, the feedstock needs to be carefully controlled to assure a stable and reliable quality. LÄS MER