Sökning: "Alloy 718"
Visar resultat 21 - 25 av 58 avhandlingar innehållade orden Alloy 718.
21. Powder degradation during powder bed fusion processing: impact of processing conditions and alloy composition
Sammanfattning : In the recent decade, powder bed fusion (PBF) metal additive manufacturing (AM) has attracted huge attention both from the industry and the research community. This effort has helped mature PBF technology as a potential alternative to conventional manufacturing processes as casting, machining, forging, etc. LÄS MER
22. Enhanced heat transfer and tool wear in high-pressure coolant assisted turning of alloy 718
Sammanfattning : Heat generated in a machining process is a common and critical obstacle faced in today's manufacturing industries. The heat generated in the cutting zone has adirect negative influence on the tool life, which, in turn contributes to increasing the manufacturing costs. LÄS MER
23. Varestraint Weldability Testing of Cast Superalloys
Sammanfattning : Precipitation hardened Ni- and Ni-Fe- based superalloys, used in hot structural components for aero engines, are subjected to hot cracking phenomena during manufacturing and specifically in welding. This type of cracking involves metallurgical reactions from the liquid phase in concomitance to weld restraints. LÄS MER
24. Microstructure Modelling of Additive Manufacturing of Alloy 718
Sammanfattning : In recent years, additive manufacturing (AM) of Alloy 718 has received increasing interest in the field of manufacturing engineering owing to its attractive features compared to those of conventional manufacturing methods. The ability to produce complicated geometries, low cost of retooling, and control of the microstructure are some of the advantages of the AM process over traditional manufacturing methods. LÄS MER
25. Microstructure Modelling of Additive Manufacturing of Alloy 718
Sammanfattning : In recent years, additive manufacturing (AM) of Alloy 718 has received increasing interest in the field of manufacturing engineering because of its attractive features compared with those of conventional manufacturing methods. Nevertheless, owing to the inherent nature of the process, the build material is exposed to complex thermal conditions that affect the microstructure. LÄS MER