Sökning: "Al-Si alloy"
Visar resultat 1 - 5 av 13 avhandlingar innehållade orden Al-Si alloy.
1. Eutectic Modification of Al-Si casting alloys
Sammanfattning : Aluminum alloys with silicon as the major alloying element are the most widely used aluminum casting alloys. The eutectic phase in these alloys is formed by hard and brittle silicon plates in an aluminum matrix. Such silicon plates can act as crack propagation paths deteriorating the toughness of the material. LÄS MER
2. The influence of Al alloy microstructure on conversion coating formation
Sammanfattning : The formation of conversion coatings based on Ce, trivalent Cr and Ti/Zr is triggered by the local pH increase at cathodic IM sites of the aluminium alloy microstructure. The pH gradient is created over the cathodic intermetallic (IM) sites of the microstructure and its intensity is influenced by their activity which depends on their chemical composition, their size, and spatial distribution. LÄS MER
3. Al-Si Cast Alloys - Microstructure and Mechanical Properties at Ambient and Elevated Temperature
Sammanfattning : Aluminium alloys with Si as the major alloying element form a class of material providing the most significant part of all casting manufactured materials. These alloys have a wide range of applications in the automotive and aerospace industries due to an excellent combination of castability and mechanical properties, as well as good corrosion resistance and wear resistivity. LÄS MER
4. An Insight into the Critical Role of Microstructure and Surface Preparation on Localized Conversion Coating Deposition on Cast Al Alloys
Sammanfattning : The spontaneous cerium conversion coating formation over aluminium alloys is affected by the chemical process conditions, the surface preparation prior to conversion treatment and the microstructure of the underlying alloy. Most research performed until now focus only on the former whereas the influence of the latter two is poorly understood. LÄS MER
5. Al-Si Cast Alloys - Microstructure and Mechanical Properties at Ambient and Elevated Temperatures
Sammanfattning : Swedish industry is a global leader in development and manufacture of automotive and aviation components where the usage of aluminium products is remarkable. In addition to manufacturing aluminium components, casting enables low-cost and low-emission production of complex geometry components with a range of sizes. LÄS MER