Sökning: "Al corrosion"
Visar resultat 1 - 5 av 77 avhandlingar innehållade orden Al corrosion.
1. The Role of Microstructure in the Atmospheric Corrosion of Selected Light Alloys and Composites
Sammanfattning : Magnesium-aluminum (Mg-Al) alloys, Mg-based metal matrix composites (MMCs) and Al alloys are among the best material candidates for future lightweight solutions. However, the use of these materials is limited by a number of issues, including the ability to resist corrosion. LÄS MER
2. FEM Modelling of Micro-galvanic Corrosion in Al Alloys Induced by Intermetallic Particles : Exploration of Chemical and Geometrical Effects
Sammanfattning : Localized corrosion, such as pitting, crevice corrosion or galvanic corrosion, is a long-standing phenomenon that can greatly limit the life of metallic materials. For decades experimental methods have been used to try to understand the underlying physical, chemical and electrochemical processes that control localized corrosion in order to find effective protection methods against its propagation. LÄS MER
3. Application of high-frequency mechanical impact treatment for fatigue strength improvement of new and existing bridges
Sammanfattning : This thesis investigates the application of High-Frequency Mechanical Impact (HFMI) treatment for fatigue strength improvement of weldments in existing and new bridges. In the former case, the welds have already been subjected to fatigue loading and accumulated damage before treatment. LÄS MER
4. The effect of microstructure and temperature on the atmospheric corrosion of Mg-Al alloys
Sammanfattning : The NaCl-induced atmospheric corrosion behavior of the Mg-Al alloy AM50 produced by rheo-casting (RC) and high pressure die casting (HPDC) techniques was studied in the laboratory. The exposures were performed at 95% RH in the absence and presence of 400 ppm CO2 at 22, 4 and -4ºC. In parallel, 99.97%Mg was investigated as reference. LÄS MER
5. Beyond Breakaway Corrosion: Secondary Corrosion Protection of Iron-based Alloys
Sammanfattning : Metallic materials intended for high temperature applications must resist both mechanical and environmental degradation. The ability to withstand corrosion is an important aspect of high temperature materials and is of major concern in, for example, heat and power production. LÄS MER