Sökning: "Adhesive layer"

Visar resultat 1 - 5 av 99 avhandlingar innehållade orden Adhesive layer.

  1. 1. Mechanical Behaviour of Single-Layer Adhesive Joints : an integrated approach

    Författare :Li Högberg; Högskolan i Skövde; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; adhesive layer; beam adhesive layer model; energy release rate; fracture; integrated; Engineering mechanics; Teknisk mekanik; Teknik; Technology;

    Sammanfattning : Innovative products that are competitive on the market are likely to employ newtypes of materials and unusual geometries. A method that can assemble dissimilarmaterials and irregular geometries cost-effectively and at the same time offera joint that is light in weight and imperceptible, is optimal. LÄS MER

  3. 2. Adhesive Wafer Bonding for Microelectronic and Microelectromechanical Systems

    Författare :Niklaus Frank; KTH; []
    Nyckelord :adhesive; wafer; bonding; low temperature; CMOS compatible; selective; local; polymer; thermoplastic; thermosetting; intermediate layer; coating; benzocyclobutene; BCB; photoresist; epoxy; glue; wafer-level; sacrificial; etching; grinding; etch-stop;

    Sammanfattning : Semiconductor wafer bonding has been a subject of interestfor many years and a wide variety of wafer bonding techniqueshave been reported in literature. In adhesive wafer bondingorganic and inorganic adhesives are used as intermediatebonding material. LÄS MER

  4. 3. Constitutive behaviour and fracture toughness of an adhesive layer

    Författare :Anders Biel; Högskolan i Skövde; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; adhesive layer; DCB-specimen; experimental method; modus I; peel; standardized methods; damage zone; stress whitening; Engineering mechanics; Teknisk mekanik; Teknik; Technology;

    Sammanfattning : This report presents the fracture energy and the complete stress – elongation relation for a structural adhesive loaded in modus I. The experiments are performed on the Double Cantilever Beam (DCB) specimen and the method to analyse the experiments is based on the J-integral approach which means that the energy release rate, i.e. LÄS MER

  5. 4. Mixed mode loaded adhesive layers : from measurement of material data to analysis of structural behaviour

    Författare :Jia Li Högberg; Högskolan i Skövde; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; adhesive layer; mixed mode testing; cohesive law; J-integral; Engineering mechanics; Teknisk mekanik; Teknik; Technology;

    Sammanfattning : In manufacturing of multi-material products, a joining method that is able to cost-effectively assemble components made of dissimilar and similar material, with irregular geometries, is optimal. As an alternative, adhesive bonding is in-creasingly adapted by the industry, which is also used in manufacturing of multi-phase materials. LÄS MER

  7. 5. Mechanical behaviour of adhesive layers : experimental methods, cohesive laws, and fracture mechanics

    Författare :Anders Biel; Kristofer Gamstedt; Högskolan i Skövde; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; experimental method; adhesive layer; cohesive law; fracture; fracture energy; energy release rate; peel; shear; Materials science; Teknisk materialvetenskap; Teknik; Technology;

    Sammanfattning : Adhesive joining is today viewed as one of the key technologies to achieve decreased emissions in the automobile industry. To decrease weight, optimal material selection often results in different materials for different parts. This leads to the necessity to join mixed material. Here, the use of adhesives is the most promising joining technology. LÄS MER