Sökning: "304L stainless steel"

Visar resultat 1 - 5 av 21 avhandlingar innehållade orden 304L stainless steel.

  1. 1. A Study of EAF Austenitic and Duplex Stainless Steelmaking Slags Characteristics

    Författare :Saman Mostafaee; Margareta Andersson; Pär Jönsson; Nzotta Mselly; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; EAF; Slag; Duplex steel; 304L stainless steel; Characterization; Microstructural evolution; Spinels; Basicity; Computational thermodynamics; Slag foaming; Metallurgical process and manufacturing engineering; Metallurgisk process- och produktionsteknik;

    Sammanfattning : The high temperature microstructure of the solid phases within the electric arc furnace (EAF) slag has a large effect on the process features such as foamability of the slag, chromium recovery, consumption of the ferroalloys and the wear rate of the refractory. The knowledge of the microstructural and compositional evolution of the slag phases during the EAF process stages is necessary for a good slag praxis. LÄS MER

  3. 2. Alkali Induced High Temperature Corrosion of Stainless Steel - Experiences from Laboratory and Field

    Författare :Jesper Pettersson; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; KCl; 304L; Biomass; Corrosion; Chlorine; Chromate; Waste; Deposit;

    Sammanfattning : The high temperature corrosion of steam superheaters is a major obstacle that has to be overcome in order to increase the electricity generating efficiency of power boilers burning biomass or waste. This thesis addresses this issue by a combination of well-controlled model experiments in the laboratory and short and long term field exposures using cooled probes in full-scale biomass and waste fired boilers. LÄS MER

  4. 3. Corrosion of Stainless Steel in Diesel Exhaust Gas After-treatment Systems with Urea Injection

    Författare :Johanna Nockert; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; urea; stainless steel; thermal cycling; High temperature corrosion; AES; XPS; condensate; SCR; diesel exhaust;

    Sammanfattning : The demands on lowering the emissions from fossil fuel keep increasing. Together with higher demands of longer component lifetime and lighter vehicles for lower fuel consumption this has led to an increasing use of stainless steels in exhaust after-treatment systems. LÄS MER

  5. 4. Surface integrity and corrosion behavior of stainless steels after grinding operations

    Författare :Nian Zhou; Rachell Pettersson; Ru Lin Peng; Stuart Lyon; Högskolan Dalarna; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; stainless steel; stress corrosion cracking; surface integrity; grinding; residual stress; Steel Forming and Surface Engineering; Stålformning och ytteknik;

    Sammanfattning : Stainless steels are widely used in applications where both the mechanical properties of steels and high corrosion resistance are required. There is continuous research to enable stainless steel components to be produced in a more economical way and be used in more harsh environments. LÄS MER

  7. 5. Microstructural Characterization of Expanded Austenite in 304L and 904L Austenitic Stainless Steels

    Författare :Giulio Maistro; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; low-temperature thermochemical treatment; S-phase; SEM; thermal stability; surface engineering; surface analysis; EBSD; XRD; austenitic stainless steel; XPS; GDOES; Expanded austenite;

    Sammanfattning : Austenitic stainless steels are among the most used materials in modern industry, mainly because of their superior corrosion resistance. However, low hardness and poor tribological properties often restrict their applicability. LÄS MER