Studies of Materials and Interfaces for Organic Electronics

Sammanfattning: Organic electronics is a rapidly evolving field with vast number of applications having high potential for commercial success. Although a great progress has been made, many organic electronic applications: organic light-emitting diodes (OLEDs), organic fieldeffect transistors (OFETs), organic solar cells, etc; still require further optimization to fulfill the requirements for successful commercialization. For many applications, available at this time organic materials do not provide satisfactory performance and stability, which hinders the possibility of a large-scale production. Therefore, the key ingredient needed for a successful improvement in performance and stability of organic electronic devices is in-depth knowledge of physical and chemical properties of molecular and polymeric materials. Since many applications encompass several thin film layers made of organics, and often also inorganic materials, the understanding of both organic-organic and hybrid interfaces is yet another important issue necessary for the successful development of organic electronics.The research presented in this thesis is based mainly on photoelectron spectroscopy, which is an experimental technique especially suited to study both surfaces and interfaces of materials. In the thesis, the properties of one of the most successful polymeric materials, poly(3,4-ethylenedioxythiophene), often abbreviated as PEDOT, have been extensively studied. The research was done in close cooperation with an industrial partner – AGFA Gevaert, Belgium. The study was focused on the exploration of the intrinsic properties of the material, such as stability, morphology and conductivity. In addition, however, a possibility of alternation of these properties was also explored. This thesis reports also about investigations of the properties of various organic-organic and hybrid interfaces. The energy level alignment at such interfaces plays important role in charge injection and performance of the thin film organic-based devices. The conditions for different energy level alignment regimes at the various interfaces have been studied. The studies on interfaces were performed in close collaboration with the R&D division of DuPont Corporation, USA. This work led to the significant advances in understanding of the interface energetics and properties of industryrelevant organic materials, as represented not only by published scientific papers, but also patent applications.