Drag reduction using plasma actuators

Sammanfattning: This thesis is motivated by the application of active flow control on the cabin of trucks, thereby providing a new means of drag reduction. Particularly, the work presented strives to identify how plasma actuators can be used to reduce the drag caused by the detachment of the flow around the A-pillars. This is achieved by conducting numerical simulations, and is part of a larger project that also includes experimental.The effect of plasma actuators is modeled through a body force, which adds very little computational cost and is suitable for implementation in most CFD solvers. The spatial distribution of this force is described by coefficients which have been optimized against experimental data, and the model was shown to be able to accurately reproduce the wall jet created by a single plasma actuator in a no-flow condition.A half cylinder geometry - a simplified geometry for the A-pillar of a truck - was used in a preliminary Large Eddy Simulation (LES) study that showed that the actuator alone, operated continuously, was not sufficient to achieve a significant reduction of the drag. Nevertheless, a significant drag reduction was obtained by simply increasing the strength of the body force to a higher value, showing that this type of actuation remains relevant for the reduction of drag.In the course of finding ways to improve the efficiency of the actuator, dynamic mode decomposition was investigated as a post-processing tool to extract structures in the flow. Such structures are identified by their spatial location and frequency, and might help to understand how the actuator should be used to maximize drag reduction. Thus a parallel code for dynamic mode decomposition was developed in order to facilitate the treatment of the large amounts of data obtained by LES. This code and LES itself were thereafter evaluated in the case of a pulsating channel flow. By using the dynamic mode decomposition it was possible to accurately extract oscillating profiles at the forcing frequency, although harmonics with lower amplitude compared to the turbulence intensity could not be obtained.