Anaerobic Digester Fluid Rheology and Process Efficiency : Interactions of Substrate Composition, Trace Element Availability, and Microbial Activity

Sammanfattning: As the anthropogenic greenhouse gas emissions continue imposing stress on our environment, it is becoming increasingly important to identify and implement new renewable technologies. Biogas production through anaerobic digestion has a great potential, since it links waste treatment with extraction of renewable energy, enabling circular bio-economies that are vital for a sustainable future.For biogas to have an important role as a renewable energy carrier in society, the scale of its production will need to be increased substantially. New substrates need to be introduced along with raising organic loading rates of the reactors to increase the rate of biogas production. This contributes to challenges in maintaining process stability, thus increasing the risk for process disturbances, including problems that were not commonly encountered before. These difficulties may be particularly pronounced when a broad range of new, largely untested substrates are introduced, leading to an increased heterogeneity of organic material entering the reactors. In the case of currently the most common reactor type; the continuous stirred-tank biogas reactor (CSTBR); such problems may include shifts in rheology (i.e. fluid behaviour) of the anaerobic digester sludge. This may lead to increased energy consumption and decreased digester mixing efficiencies, which in turn may lead to inefficient biogas processes, ultimately decreasing the economic and environmental viability of biogas production. Much is still unknown regarding how rheology shifts happen in biogas reactors, particularly when it comes to what role the substrate plays in rheological dynamics, as compared to the microbial community during varying levels of biogas process stability.This thesis elucidates the interactions between substrate type, microbial community and its metabolic activity, and anaerobic sludge rheology. A number of sludge samples from mesophilic and thermophilic CSTBRs digesting a broad range of substrates was analysed for their rheology. The specific effects of individual substrate types on CSTBR sludge rheology and the resulting implications for stirring power requirements and mixing efficiency were investigated. In order to also asses to which extent the microbial metabolism affects rheology at different levels of process disturbance, an experiment with a trace-element-induced inhibition of specific metabolic pathways under mesophilic reactor conditions was performed. This was used to identify the sequence of different interactions that occur in the reactor after the process begins to fail, and to evaluate how these interactions link to changes in digester sludge rheology. Finally, a case study of a disturbed thermophilic anaerobic digestion process was performed, including the monitoring of the response of rheology in relation to process stability, which was modified by changing trace element concentrations. The use of artificial substrate without polymeric compounds in both cases allowed for an evaluation of effects of the microbial community and its metabolic products on rheology without including the effects of complex substrates.The results showed that substrate type has a large effect on how different process parameters correlate with fluid behaviour. This was particularly apparent in the case of total solids and total volatile solids, which correlated well with rheological parameters for samples from reactors digesting agricultural waste, sewage sludge, paper mill waste, or food waste, but not for mesophilic co-digesters. Among the different substrates investigated, food waste was generally observed to lead to the highest limit viscosities (i.e. apparent viscosities at high shear rates, where it becomes linear and constant) of the anaerobic sludge, while digestion of paper mill waste and thermophilic co-digestion led to some of the lowest. No fluid type could be clearly coupled to a specific substrate, but it could be observed that increased solids content could generally be associated with more complex, non-Newtonian rheological behaviour. The differences in fluid characteristics between reactors corresponded to large differences in modelled stirring power requirements and mixing efficiency. The results indicated that fluids with high values of rheological parameters, such as the consistency index (K) or yield stress (τ0), would likely require more power or an adapted stirring system to achieve complete mixing. The substrates generally contributed more to the rheology characteristics of the anaerobic sludge than microbial cells on their own. Trace element-induced process disturbance initially led to the inhibition of specific microbial groups among methanogenic archaea or their syntrophic partners, which later escalated to broader inhibition of many microbial groups due to the accumulation of fermentation products. This resulted in microbial cell washout with a corresponding decrease of the contribution of the cells to anaerobic sludge rheology. A recovery of the thermophilic anaerobic digestion process was possible after the supplementation of selenium and tungsten was increased, resulting in increased propionate turnover rates, growing cell densities, and higher viscosity. Major shifts in the methanogenic community were observed, corresponding to the level of process stability. It could be concluded based on these experiments that the specific effect of microbial cells and their activity on sludge rheology were linked to cell density, which corresponded to process stability.A conceptual scheme was developed based on the studies in this thesis, defining complex interactions between substrate, microbial metabolism, and anaerobic sludge rheology in biogas processes. The possible causes of rheology shifts are visualised and discussed.