Sökning: "wear modelling"

Visar resultat 1 - 5 av 78 avhandlingar innehållade orden wear modelling.

  1. 1. On wear of wood-cutting tools : Tool materials, wear mechanisms and modelling

    Författare :Johan Nordström; []
    Nyckelord :Tool material; Wood cutting; Wear; Modelling;

    Sammanfattning : Bandsaw blades are commonly used in the sawmill industry for timber cutting. The saw teeth are gradually worn during cutting and will finally cause unacceptable surface roughness and dimensional deviations on the sawn wood product. Maintenance by re-sharpening of the saw teeth is therefore necessary after a certain time of sawing. LÄS MER

  3. 2. Simulation of Wheel and Rail Profile Evolution : Wear Modelling and Validation

    Författare :Roger Enblom; KTH; []
    Nyckelord :contact; wear; wear prediction; wear model; wheel profile; rail profile; simulation vehicle-track interaction; multibody simulation; MBS; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : Numerical procedures for reliable wheel and rail wearprediction are rare. Recent development of simulationtechniques and computer power together with tribologicalknowledge do however suggest computer aided wear prediction. LÄS MER

  4. 3. Wear in cone crusher chambers

    Författare :Mats Lindqvist; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; cone crusher; modelling; wear; rock crusher; work hardening;

    Sammanfattning : Cone crushers are widely used in the mining and aggregates industries to reduce the size of blasted rock. A cone crusher consists of a fixed conic liner called concave and inside it a smaller moving liner called mantle. The mantle is suspended on an eccentrically rotating shaft. LÄS MER

  5. 4. On Simulation of Uniform Wear and Profile Evolution in the Wheel - Rail Contact

    Författare :Roger Enblom; Mats Berg; Simon Iwnicki; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; wheel-rail contact; wear; wear prediction; wear model; wheel profile; rail; Vehicle engineering; Farkostteknik;

    Sammanfattning : Numerical procedures for reliable wheel and rail wear prediction are rare. Recent development of simulation techniques and computer power together with tribological knowledge do however suggest computer aided wear prediction as possible. LÄS MER

  7. 5. Influence of Microstructure in Machining of Nickel and Nickel-Iron Based Alloys

    Författare :Stefan Olovsjö; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Wear mechanisms; Simulation; Tool wear; Burr; Meta-modelling; Inconel 718; Metal cutting; Superalloy; Waspaloy; Chip morphology; Notch wear; Alloy 718; JMatPro;

    Sammanfattning : Superalloys are used in applications such as turbines, steam power plants and nuclear power systems in components that require good high temperature properties and/or corrosion resistance. They are classified as difficult-to-cut materials and hence, from a sustainable production point of view, tool wear and tool life are major factors when machining these alloys. LÄS MER