Sökning: "water pressure test"

Visar resultat 1 - 5 av 112 avhandlingar innehållade orden water pressure test.

  1. 1. Water powered percussive rock drilling : process analysis, modelling and numerical simulation

    Författare :Göran Tuomas; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Vattenteknik; Water Resources Engineering;

    Sammanfattning : This thesis is devoted to problems, processes and systems related to the recently developed water powered percussive rock drilling method. The technology, which uses ordinary water to drive down-the-hole hammers, has been used to produce more than 6 million meters of blast holes within the mining industry. LÄS MER

  2. 2. Water in roads: Flow paths and pollutant spread

    Författare :Hedi Rasul; B. Olofsson; Helen Kristine French; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; De-icing salt; Road; Tracer test; ERT; Water content; Road pollutants; Flow pathways; Land and Water Resources Engineering; Mark- och vattenteknik;

    Sammanfattning : For better road construction and maintenance while minimising damage to the environment and groundwater, it is essential to monitor and model hydrological impacts on roads and consider pollution of groundwater. Water content in unbound material in road layers changes continuously and water flow usually occurs along pathways that are the main corridors for pollutant spread to groundwater. LÄS MER

  3. 3. A flexible and polarizable water model built on interpolated multipoles

    Författare :Jonatan Öström; Lars Gunnar Moody Pettersson; Gábor Csányi; Stockholms universitet; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Multipole; Regression; Polarization; Machine Learning; Molecular Dynamics; Water; Theoretical Physics; teoretisk fysik;

    Sammanfattning : Water has a rich phase diagram with regions of meta-stability, the prime examples being super-cooled and super-heated liquid water.Below ca 50 °C, water exhibits unusual and not yet fully explained anomalous thermodynamic properties upon cooling, for example a minimum in compressibility at 46 °C, a minimum in heat capacity at 35 °C, a density maximum at 4 °C, and a compressibility maximum at -44 °C in the supercooled liquid, at ambient pressure. LÄS MER

  4. 4. Effects of deep excavations in soft clay on the immediate sourroundings-Analysis of the possibility to predict deformations and reactions against the retaining system

    Författare :Anders Kullingsjö; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; MIT-S1; Sheet pile wall; Soil-structure interaction; Strain; Stress; Ground surface settlement; Finite element method; Case history; Shear test; Shear strength; Pore pressure; Analysis; Constitutive models; Plane strain; Elastoplasticity; Laboratory tests; Factor of safety; Stiffness; e-ADP; Earth pressure; Anisotropy; Soft Clay; Deep excavation; Retaining wall; Shear stress; Deformation;

    Sammanfattning : When excavating in an urban environment, the evaluation of the magnitude and distribution of ground movements is an important part of the design process, since excessive movements can damage adjacent buildings and utilities. In order to minimize movement of the surrounding soil, a retaining wall support system is used for deep excavations to provide lateral support. LÄS MER

  5. 5. Characterisation of Fractured Rock for Grouting Using Hydrogeological Methods

    Författare :Åsa Fransson; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; hydraulic test; specific capacity; grouting; water pressure test; geological mapping; grout take; aperture; penetration length; transmissivity;

    Sammanfattning : Sealing of tunnels by grouting demands knowledge concerning the fractured rock and the grout, followed by an appropriate choice of strategy and equipment. In this thesis, the characterisation of rock is the main issue and, since it addresses the engineering problem of producing a description for grouting, the properties of grout and the grouting procedure need to be considered. LÄS MER