Sökning: "tool steel be"
Visar resultat 1 - 5 av 162 avhandlingar innehållade orden tool steel be.
1. Toughness of Tool Steel
Sammanfattning : Toughness is the ability to resist tensile stresses in the presence of a notch or crack. Sometimes gross cracking of industrial tools, mould or dies, occurs due to insufficient toughness. As the economic consequences of the gross cracking are serious, the toughness of industrial tool material, generally tool steel, is of paramount importance. LÄS MER
2. A study of slag-steel-inclusion interaction during Ladle treatment
Sammanfattning : The thesis is based on two supplements with two major objectives. In the first supplement equilibrium top slag-steel bulk and inclusions-steel bulk were investigated by comparison between calculated and measured oxygen activity values. This was done by applying different oxide activity models for slags combined with thermodynamic calculations. LÄS MER
3. Polishability of tool steels : Characterisation of high gloss polished tool steels
Sammanfattning : The manufacturing of plastic components, like a majority of other mass produced discrete parts, require well designed dies and moulds. Complex geometries and increasing demands on final surface appearance, which is strongly connected to the quality impression, are pushing for high demands on mould-makers and polishers as well as steel producers. LÄS MER
4. Performance of advanced tool steels for cutting tool bodies
Sammanfattning : Performance of indexable insert cutting tools is not only about the performance of cutting inserts. It is also about the cutting tool body, which has to provide a secure and accurate insert positioning as well as its quick and easy handling under severe working conditions. LÄS MER
5. The effect of workpiece material and its microstructure on tool wear in metal cutting
Sammanfattning : The aim of the present work is to promote the basic understanding of how the workpiece material and its microstructure affect the tool wear during metal cutting. To isolate the effect of the workpiece material, the tool material (uncoated cemented carbide) was kept constant while the workpiece was varied. LÄS MER