Sökning: "spray coating"
Visar resultat 1 - 5 av 45 avhandlingar innehållade orden spray coating.
1. Spray-Dried Powders for Inhalation : Particle Formation and Formulation Concepts
Sammanfattning : Spray drying is a method with a high potential in the preparation of protein particles suitable for pulmonary delivery. However, surface induced denaturation of bio-molecules during atomization and subsequent drying can be substantial and it is therefore important to develop new formulation concept for concurrent encapsulation and stabilization of proteins during spray drying. LÄS MER
2. Particle motion, coating and drying in Wurster fluidized beds - An experimental and discrete element modeling study
Sammanfattning : This thesis focuses on developing a mathematical model that is capable of predicting the fluidized bed coating process. First a basic understanding of pellet motion in a Wurster fluidized bed was established by conducting a series of experiments using the positron emission particle tracking (PEPT) technique. LÄS MER
3. Modeling and simulation of rotary bell spray atomizers in automotive paint shops
Sammanfattning : The paint and surface treatment processes in automotive paint shops are characterized by multiphase and free surface flows, multiphysics interactions, multiscale phenomena, and large moving geometries. The current version of the software for simulation of spray painting developed at the Fraunhofer-Chalmers Centre relies on measurements of droplet size distributions and velocity profiles below the applicator that can be used as input to the simulations. LÄS MER
4. Particle Coating in a Wurster Type Bed
Sammanfattning : The Wurster bed process is frequently used for film coating. In the Wurster bed, particles circulate in the equipment and are sprayed with a liquid which forms a coating when dry. The procedure is repeated until the desired characteristics of the coating layer are obtained. LÄS MER
5. On the fluid mechanics of electrochemical coating and spray painting
Sammanfattning : Finite-volume methods have been used for modeling of fluidflows involved in forced convection electrochemical coating androtating spray painting systems. Electrodeposition on a singlecircular cylinder under forced convection for Reynolds numbers10 and 200 was simulated. LÄS MER