Sökning: "response surface methodology"

Visar resultat 6 - 10 av 78 avhandlingar innehållade orden response surface methodology.

  1. 6. On osseointegration in response to controlled surface nanotopography

    Författare :Dimitrios Karazisis; Göteborgs universitet; []
    Nyckelord :MEDICIN OCH HÄLSOVETENSKAP; MEDICAL AND HEALTH SCIENCES; in vivo; nanotopography; osseointegration; topography;

    Sammanfattning : Knowledge about the biological responses provoked by the surface modification of titanium implants on the nanoscale is still in its infancy. Although in vitro studies claim superior effects considering higher adhesion and proliferation of osteoblasts in the short term and even differentiation towards the osteogenic cell lineage in the long term, these responses do not necessarily reflect the actual outcome in the complex in vivo environment. LÄS MER

  3. 7. Laser Doppler perfusion imaging : methodology and skin applications

    Författare :Karin Wårdell; Linköpings universitet; []
    Nyckelord :MEDICINE; MEDICIN;

    Sammanfattning : Over the last decade a number of emerging technologies have become available for the non-invasive study of skin anatomy and physiology. In this thesis, a method for mapping tissue perfusion based on the laser Doppler technique is presented together with some of the associated experimental and clinical applications. LÄS MER

  4. 8. Weldability and Testing Methodology in Precipitation Hardening Superalloys

    Författare :Jonny Jacobsson; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Weldability; Alloy 718; ATI® 718Plus™ and Haynes® 282®; Superalloys; Varestraint; Waspaloy®;

    Sammanfattning : Usable weldability data is desired in the manufacturing industry, especially within the aerospace industry where fabrication of structural jet engine components are realized. Welding of precipitation hardening superalloys such as Waspaloy®, Alloy 718, ATI® 718Plus™ and Haynes® 282® in particular can lead to solidification cracking in the fusion zone, liquation cracking in the heat affected zone and/or to solid state cracking. LÄS MER

  5. 9. Effects of Corona and Ozone Exposure on Properties of Polymeric Materials for High Voltage Outdoor Applications

    Författare :Bin Ma; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; surface resistivity; silicone rubber; nanocomposite; Outdoor insulation; ozone treatment; dielectric response; hydrophobicity; corona treatment; composite insulation; volume resistivity; ageing.; mechanical strength;

    Sammanfattning : Despite the past four decades of service experiences with polymeric insulators in power systems all over the world, an adequate standard allowing for proper selection of polymeric materials for applications in high voltage outdoor environments has still been lacking. Therefore CIGRE Working Group D1. LÄS MER

  7. 10. Aerodynamic Design and Optimization of Intermediate Ducts for High By-pass Ratio Jet Engines

    Författare :Fredrik Wallin; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Intermediate transition ducts; vortex generators; S-shaped ducts; response surface methodology; source term model; optimization;

    Sammanfattning : Demands on improved efficiency and reduced noise levels cause a strive toward high by-pass ratio commercial aero engines. This results in multi-spool aero engines with small high-pressure ratio cores and large fans. The low-pressure system has a lower rotational speed and a larger radius than the high-pressure core system. LÄS MER