Sökning: "plastic materials"

Visar resultat 1 - 5 av 414 avhandlingar innehållade orden plastic materials.

  1. 1. Microstructure and plastic deformation of textured CVD alumina coatings

    Författare :Siamak Shoja; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; α-Al2O3; Texture; Coatings; TKD; Plastic deformation; Deformation mechanisms; Electron microscopy; CVD;

    Sammanfattning : It is known that the wear performance of α-alumina coatings produced by chemical vapor deposition (CVD) is significantly influenced by the type and degree of texture. However, the main reasons behind this behavior are not fully understood. This thesis contains studies of two related topics for increasing the understanding of α-alumina coatings. LÄS MER

  3. 2. Additive-Driven Improvements in Interfacial Properties and Processing of TMP-Polymer Composites

    Författare :Seyedehsan Hosseini; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; molybdenum disulfide; magnesium stearate; thermomechanical pulp; alkyl ketene dimer; friction; rheology;

    Sammanfattning : Efforts to address environmental concerns have resulted in new regulations designed to plan the reduction of plastic and synthetic polymer usage, necessitating the search for sustainable natural alternatives with comparable cost-effectiveness and mechanical performance. Thermomechanical pulp (TMP) fibres are one of the most affordable natural fibres that have no chemical refining in production, production have a high yield of 90-98% and TMP fibres have been demonstrated to improve the mechanical characteristics (strength, stiffness and toughness) of wood-polymer composites (WPCs) compared to the pure polymer. LÄS MER

  4. 3. Heterogeneous deformation of multi-phase engineering materials - an in-situ neutron diffraction study

    Författare :Nitesh Raj Jaladurgam; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Eutectic high entropy alloys; in-situ neutron diffraction; Deformation mechanisms; Superalloys; Electron microscopy;

    Sammanfattning : Gas turbines are complex power generation systems used in aerospace or land-based-power stations. Materials such as Ni-base superalloys are involved in the combustion zone of these machines, which continuously experiences harsh environments with loading at high temperatures. LÄS MER

  5. 4. Monotonic and Cyclic Plastic Deformation of High-Strength Aluminium Alloys

    Författare :Magnus Hörnqvist Colliander; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Strain rate effects; Heat treatment; Dynamic strain ageing; Precipitation hardening; Low cycle fatigue; AA7030; Plastic deformation; Temperature effects; EN AW-7030; Al-Zn-Mg; Strain hardening; Mechanical properties; Dynamic precipitation.;

    Sammanfattning : Dynamic strain ageing (DSA) and dynamic precipitation (DP) are two, closely interrelated, phenomena arising from the dynamic interaction between mobile solute atoms and dislocations. The occurrence of DSA and DP is confined to specific ranges of strain rate and temperature, and aluminium alloys are generally prone to experience DSA and DP already at ambient temperatures and conventional strainrates. LÄS MER

  7. 5. Numerical Modeling of Plasticity in FCC Crystalline Materials Using Discrete Dislocation Dynamics

    Författare :Arash Hosseinzadeh Delandar; Pavel Korzhavyi; Rolf Sandström; Mikko Alava; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Dislocations; crystal plasticity; discrete dislocation dynamics; Cu single crystal; high strain rate deformation; strain rate sensitivity; plastic anisotropy; slip band formation; Teknisk materialvetenskap; Materials Science and Engineering;

    Sammanfattning : Plasticity in crystalline solids is controlled by the microscopic line defects known as “dislocations”. Decisive role of dislocations in crystal plasticity in addition to fundamentals of plastic deformation are presented in the current thesis work. LÄS MER