Sökning: "nitrogen iron"

Visar resultat 11 - 15 av 91 avhandlingar innehållade orden nitrogen iron.

  1. 11. Nitrogen-cycling tracing methods : Case studies at cold-climate mine sites in northern Sweden

    Författare :Lino Nilsson; Anders Widerlund; Andreas Bryhn; Luleå tekniska universitet; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; Applied Geochemistry; Tillämpad geokemi;

    Sammanfattning : High nitrogen effluents from mine sites is an environmental issue which has received relatively little attention historically. In recent years a number of studies have showed the environmental effects of high nitrogen discharge to natural water bodies, which include local eutrophication, high risk of acute reducing conditions and changed species composition in the receiving waters. LÄS MER

  3. 12. NOx formation in iron ore rotary kilns

    Författare :Rikard Edland; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; rotary kiln; Grate-Kiln process; emissions control; combustion chemistry; Nitrogen oxides;

    Sammanfattning : Iron ore pellets are often produced using the so-called Grate-Kiln process, which is designed to oxidize the magnetite (Fe3O4) to hematite (Fe2O3) and to sinter the pellets so they can be used in steel manufacturing. The heat required for this process comes from the combustion of a pulverized fuel in a rotary kiln, involving the formation of a jet flame. LÄS MER

  4. 13. Defect Formation during Solidification in Grey Iron Castings

    Författare :Lennart Elmquist; Ingvar Svensson; Attila Diószegi; Doru Stefanescu; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Shrinkage Porosity; Grey Iron; Solidification; Nucleation; Primary Austenite; DAAS; Eutectic Cells; Microstructure; Macrostructure; Hot Spot; Oxygen; Hydrogen; Materials science; Teknisk materialvetenskap;

    Sammanfattning : The presence of defects is of major concern in the production of grey iron castings. Some defects are merely an aesthetic problem while others can be detrimental for the performance of the component. Among the several possible defects, shrinkage porosity is one of the more challenging to understand and avoid. LÄS MER

  5. 14. NOx Formation in Rotary Kilns for Iron Ore Pelletization

    Författare :Rikard Edland; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; rotary kiln; combustion chemistry; emissions control; Grate-Kiln process; Nitrogen oxides; NOx formation;

    Sammanfattning : The production of iron ore pellets is often performed in the so-called Grate-Kiln process. The aim of the process is to oxidize the magnetite (Fe3O4) to hematite (Fe2O3) and to sinter the pellets so they can be used in steel manufacturing. LÄS MER

  7. 15. Behavior of iron-based oxygen carriers at deep reduction states

    Författare :Victor Purnomo; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; oxygen carrier; fuel conversion; chemical looping; physical performance; deep reduction; reactivity; iron oxides;

    Sammanfattning : Oxygen carriers have an important role as bed materials in both common circulating fluidized bed combustion unit (also known as oxygen-carrier-aided combustion, OCAC) and in various chemical looping processes. Contrary to conventional bed materials, e.g., sand, oxygen carriers are capable of transferring both oxygen and heat. LÄS MER