Sökning: "modulus of elasticity"
Visar resultat 1 - 5 av 66 avhandlingar innehållade orden modulus of elasticity.
1. The influence of graphite morphology on the elastic behaviour of cast irons
Sammanfattning : The morphology of the graphite phase largely controls the resulting properties of different grades of cast iron. In flake graphite cast irons, the mechanical properties are low while the thermal conductivity is high. In contrast, with spheroidal graphite cast irons, the mechanical properties are high while the thermal conductivity is low. LÄS MER
2. Influences of the Graphite Phase on Elastic and Plastic Deformation Behaviour of Cast Irons
Sammanfattning : The amount and morphology of the graphite phase largely controls the resulting properties of cast iron. For instance, in flake graphite cast irons the mechanical properties are low while the thermal conductivity is high. LÄS MER
3. Strength grading of structural timber and EWP laminations of Norway spruce : Development potentials and industrial applications
Sammanfattning : Machine strength grading of structural timber is a sawmill process by which considerable value is added to sawn products. The principle of such grading is that the strength of a timber member is predicted on the basis of a so called indicating property (IP) which, in general, represents an averaged value of the modulus of elasticity (MOE) measured over a board length of about one meter or more. LÄS MER
4. Towards a measurement of paper pulp quality : ultrasonic spectroscopy of fibre suspensions
Sammanfattning : For the paper and pulp industry in Sweden and Finland to remain competitive against countries with lower overheads, they have to constantly strive to improve the quality and the efficiency of the manufacturing processes. One of the ways of doing this is to introduce sensors that will provide valuable online feedback on the characteristics of the pulp so that adjustments can be made to optimise the manufacturing process. LÄS MER
5. Strength grading of structural timber and EWP laminations of Norway spruce : Development potentials
Sammanfattning : Strength grading of structural timber is a process by which value is added to sawn products. It is to the greater part carried out using machine grading based on statistical relationships between so called indicating properties and bending strength. LÄS MER