Sökning: "laminated product"

Visar resultat 1 - 5 av 12 avhandlingar innehållade orden laminated product.

  1. 1. Mechanics of Cross-Laminated Timber

    Författare :Dietrich Buck; Olle Hagman; Dick Sandberg; Mats Ekevad; Mikael Sjödahl; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; CLT assembly; CLT manufacture; Crosslam; DIC analysis; Digital speckle photography; Full-field mechanics; Laminated wood product; Mass timber engineering; Non-contact measurement; Non-destructive; Optical measurement; Panel configuration; Strain localization; X-lam; Alternativ byggmetod; Bildkorrelation; Hållbart byggande; KL- trä; Korslimmat trä; Skjuvtöjning; Massivträ; Träkonstruktion; Träteknik; Wood Science and Engineering;

    Sammanfattning : Increasing awareness of sustainable building materials has led to interest in enhancing the structural performance of engineered wood products. Wood is a sustainable, renewable material, and the increasing use of wood in construction contributes to its sustainability. LÄS MER

  3. 2. Shape stability of laminated veneer products

    Författare :Lars Blomqvist; Dick Sandberg; Jimmy Johansson; Magdalena Sterley; Linnéuniversitetet; []
    Nyckelord :LANTBRUKSVETENSKAPER; AGRICULTURAL SCIENCES; adhesive; beech; birch; bending; laminated veneer products; moulding; shape stability; spring-back; twist; veneer; Forestry and Wood Technology; Skog och träteknik;

    Sammanfattning : This thesis is about the shape stability of laminated veneer products.Laminated veneer products consist of veneers bonded together with adhesive into a predetermined shape. Such products are used in several contexts but especially in furniture manufacture. LÄS MER

  4. 3. Moisture Transport and Moisture-Induced Distortions in Timber - an Experimental and Numerical Study

    Författare :John Eriksson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; heat transfer; gluing; twist; drying; wood; timber board; laminated product; FEM; distortion; moisture; mass transfer;

    Sammanfattning : Timber products subjected to climatic variations commonly display moisture-induced distortions that can lead to serious problems for end-users. The aim of the thesis, which consists of an extended summary and six appended papers, was to investigate the potential of using the gluing technique suggested here for dealing with problems of moisture-induced distortions and developing the heat and mass transfer models which such distortion analyses require. LÄS MER

  5. 4. Experimental characterization and numerical modeling of compression perpendicular to the grain in wood and cross-laminated timber

    Författare :Shaheda T. Akter; Thomas K. Bader; Erik Serrano; Jan Oscarsson; Reinhard Brandner; Linnéuniversitetet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; rolling shear; biaxial testing; stress combination; RT-plane; moisture influence; rolling shear creep; digital image correlation; strain field; CLT connection; rotational stiffness; rullskjuvning; biaxiell undersökning; spänningskombination; RT-plan; fuktpåverkan; krypning vid rullskjuving; digital bildkorrelation; töjningsfält; KLTanslutning; rotationsstyvhet; Byggteknik; Civil engineering;

    Sammanfattning : Compression perpendicular to the grain (CPG) of wood is a typical loading situation in timber structures. It has been an extensively studied research topic for decades, due to the highly ductile behavior of wood under such loading, the large variations in mechanical properties, and the relevance of these properties in structural design. LÄS MER

  7. 5. Bonding veneers using only heat and pressure : focus on bending and shear strength

    Författare :Carmen Cristescu; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; self-bonding; auto-adhesion; LVL; beech; Fagus Sylvatica; high-temperature; pressure; Wood Technology; Träteknik;

    Sammanfattning : A compact laminated board can be obtained by pressing layers of veneers with no other material or substance placed between them. The process does not require the use of steam pretreatment, surface activation methods, a gastight press, friction or adhesives. It strictly involves the heat and the pressure induced by the press in the veneers. LÄS MER