Sökning: "laboratory sheet"

Visar resultat 1 - 5 av 43 avhandlingar innehållade orden laboratory sheet.

  1. 1. Distributions Of Fiber Characteristics As A Tool To Evaluate Mechanical Pulps

    Författare :Sofia Reyier Österling; Per Engstrand; Hans Höglund; Olof Ferritsius; Rita Ferritsius; Hans Ersson; Per Gradin; Mittuniversitetet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fiber; fibre; fiber characteristics; fiber dimension; fiber properties; mechanical pulp; FiberLab; raw data; distribution; fiber wall thickness; BIN; bonding ability influence; bonding indicator; bonding ability; fiber width; fibrillation; collapse resistance; laboratory sheet; fiber analyzer; optical analyzer; TMP; CTMP; SGW; sheet model; prediction; fiber characterization; hydrocyclone; fractionation; kernel density estimation; KDE; diffusion mixing; acoustic emission; F0.90; Norway spruce; Picea abies;

    Sammanfattning : Mechanical pulps are used in paper products such as magazine or news grade printing papers or paperboard. Mechanical pulping gives a high yield; nearly everything in the tree except the bark is used in the paper. This means that mechanical pulping consumes much less wood than chemical pulping, especially to produce a unit area of printing surface. LÄS MER

  3. 2. Wear in sheet metal forming

    Författare :Anders Gåård; Pavel Krakhmalev; Jens Bergström; Åsa Kassman; Karlstads universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Friction; Sheet metal forming; Galling; Materials science; Teknisk materialvetenskap; Materialteknik; Materials Engineering;

    Sammanfattning : The general trend in the car body manufacturing industry is towards low-series production and reduction of press lubricants and car weight. The limited use of press lubricants, in combination with the introduction of high and ultra-high strength sheet materials, continuously increases the demands of the forming tools. LÄS MER

  4. 3. Wear mechanisms in sheet metal forming : Effects of tool microstructure, adhesion and temperature

    Författare :Anders Gåård; Pavel Krakhmalev; Jens Bergström; Ulf Olofsson; Karlstads universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Galling; sheet metal forming; wear; friction; adhesion; temperature; Materialteknik; Materials Engineering;

    Sammanfattning : The general trend in the car body manufacturing industry is towards low-series production and reduction of press lubricants and car weight. The limited use of lubricants, in combination with the introduction of high and ultrahigh-strength sheet materials, continuously increases the demands on the forming tools. LÄS MER

  5. 4. Effects of deep excavations in soft clay on the immediate sourroundings-Analysis of the possibility to predict deformations and reactions against the retaining system

    Författare :Anders Kullingsjö; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; MIT-S1; Sheet pile wall; Soil-structure interaction; Strain; Stress; Ground surface settlement; Finite element method; Case history; Shear test; Shear strength; Pore pressure; Analysis; Constitutive models; Plane strain; Elastoplasticity; Laboratory tests; Factor of safety; Stiffness; e-ADP; Earth pressure; Anisotropy; Soft Clay; Deep excavation; Retaining wall; Shear stress; Deformation;

    Sammanfattning : When excavating in an urban environment, the evaluation of the magnitude and distribution of ground movements is an important part of the design process, since excessive movements can damage adjacent buildings and utilities. In order to minimize movement of the surrounding soil, a retaining wall support system is used for deep excavations to provide lateral support. LÄS MER

  7. 5. Service Life Assessment of Harbor Structures - Case studies of chloride ingress into concrete and sheet piling corrosion rates

    Författare :Henrik Wall; Avdelningen för Byggnadsmaterial; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; chloride ingress; sampling methods; corrosion rates; sheet piling; ultra-sonic measurements; service life; durability; quay structures; harbor structures;

    Sammanfattning : The two most used building materials in harbor structures are undoubtedly steel and concrete. These two materials are often combined in the structures of wharfs and quays where the steel sheet pile walls often have cap beams of reinforced concrete. LÄS MER