Sökning: "failure criterion"

Visar resultat 1 - 5 av 81 avhandlingar innehållade orden failure criterion.

  1. 1. Wellbore stability analysis based on a new true-triaxial failure criterion

    Författare :Adel Al-Ajmi; Robert Zimmerman; Bernt Aadnoy; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; failure criteria; Mogi failure criterion; intermediate principal stress; polyaxial test data; wellbore stability; Geoengineering and mining engineering; Geoteknik och gruvteknik;

    Sammanfattning : A main aspect of wellbore stability analysis is the selection of an appropriate rock failure criterion. The most commonly used criterion for brittle failure of rocks is the Mohr-Coulomb criterion. LÄS MER

  3. 2. A Damage-Based Interface Model: Application to the Degradation and Failure of a Polycrystalline Microstructure

    Författare :Patrik Cannmo; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; damage; polycrystalline microstructure; degradation; slip and dilatation; interfaces; FE-calculations; viscoplasticity; plasticity; failure;

    Sammanfattning : A constitutive model for material interfaces is presented. The model is based on damage coupled to plastic (or viscoplastic) slip and dilatation, and it is able to describe the successive degradation and failure of an interface. LÄS MER

  4. 3. Deformation and failure of rock

    Författare :Kelvis del Carmen Pérez Hidalgo; Håkan Stille; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Mining and Rock Engineering; Gruv- och berganläggningsteknik;

    Sammanfattning : In this doctoral thesis work the relationship between the deformation and the initiation of failure around an underground excavation was studied. In this work data from observed failure and measured deformations was used. This work is based on information obtained from laboratory test, underground field cases and numerical analysis. LÄS MER

  5. 4. Continuum Mechanics Modelling of Corrugated Board

    Författare :Ulf Nyman; Institutionen för byggvetenskaper; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Material technology; assumed natural strain shell; failure criterion; lifetime; reliability; moisture transport; sorption hysteresis; corrugated board; hygro-elasticity; Materiallära; materialteknik;

    Sammanfattning : The storage of compressive loaded boxes in an environment with naturally varying humidity is a practical issue in corrugated board employment. Time dependent variables such as moisture content, strain fields, stress fields and material strength play important roles for the time to failure. LÄS MER

  7. 5. Modelling of Forming and Welding in Alloy 718

    Författare :Lluís Pérez Caro; Mats Oldenburg; Eva-Lis Odenberger; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Forming; welding; Alloy 718; damage; GISSMO; failure; Hållfasthetslära; Solid Mechanics;

    Sammanfattning : The reduction of fuel consumption and carbon dioxide emissions are currently a key factor for the aviation industry due to major concerns about climate change and more restrictive environmental laws. One way to reduce both fuel consumption and CO2 emissions is by significantly decreasing the vehicle’s weight while increasing engine's efficiency. LÄS MER