Sökning: "eutectic cast iron"

Visar resultat 1 - 5 av 18 avhandlingar innehållade orden eutectic cast iron.

  1. 1. Compacted graphite iron : On solidification phenomena related to shrinkage defects

    Författare :Björn Domeij; Attila Diószegi; Babette Tonn; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Compacted graphite iron; Spheroidal graphite iron; Solidification; Microsegregation; Porosity; Kompaktgrafitjärn; segjärn; stelning; mikrosegregation; porositet;

    Sammanfattning : An improved understanding of solidification of compacted graphite iron (CGI) is necessary to predict shrinkage related casting defects. Spheroidal graphite is not only found in ductile iron (SGI) but usually also in CGI, but its characteristics and role in this material is less understood. LÄS MER

  3. 2. The role of primary austenite morphology in cast iron

    Författare :Juan Carlos Hernando; Attila Diószegi; Arne Dahle; Jessica Elfsberg; Roberto Boeri; Jönköping University; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Solidification; Cast Iron; Primary Austenite; Microstructure Evolution; Coarsening; LGI; CGI; SGI; UTS; stelning; gjutjärn; primär austenit; mikrostrukturbildning; förgrovning; LGI; CGI; SGI; UTS;

    Sammanfattning : Automotive industry products portfolio includes a wide variety of complex-shaped cast iron products, such as truck engine components. Urged by strict environmental regulations on emissions, these components constantly need to combine higher demands on performance with lighter designs. LÄS MER

  4. 3. Metal Expansion Penetration During Solidification of Grey Cast Iron

    Författare :Izudin Dugic; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Grey cast iron; solidification; solidification modelling; graphite expansion; molar volume; casting simulation; thennal analysis; thermoanalysis cup; casting temperature; inoculation; inoculant; meta! expansion penetration; eutectic cell size.; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : The meta! expansion penetration has been examined experimentally. The whole casting process was simulated using a commercial software, in order to investigate the solidification characteristics and the pore formation in the casting studied. LÄS MER

  5. 4. On microstructure formation and mechanical properties in grey cast iron

    Författare :Attila Diószegi; Preben N. Hansén; Linköpings universitet; []
    Nyckelord :grey iron; nucleation; primary austenite; eutectic cell; growth rate; inoculation; thermal analysis; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : A major user of cast components is the automotive industry, where the functionality of the components is related to environmental demands. Internal combustion engines are constantly being improved to emit less pollution. A vital part in this development is to increase the material properties of engine components during their life cycle. LÄS MER

  7. 5. The mechanisms of metal expansion penetration during solidification of grey cast iron

    Författare :Izudin Dugic; Preben Norgaard Hansén; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Grey cast iron; solidification; solidification modelling; graphite expansion; molar volume; casting simulation; thermal analysis; thermoanalysis cup; casting temperature; inoculation; inoculant; metal expansion penetration; eutectic cell size; primary austenite; austenite grain; TECHNOLOGY; TEKNIKVETENSKAP;

    Sammanfattning : The production of high quality castings requires the casting surface to be clean and free from defects. One type of defect often found is caused by metal penetration into the sand mould. LÄS MER