Sökning: "elastic deformation"
Visar resultat 1 - 5 av 170 avhandlingar innehållade orden elastic deformation.
1. Influences of the Graphite Phase on Elastic and Plastic Deformation Behaviour of Cast Irons
Sammanfattning : The amount and morphology of the graphite phase largely controls the resulting properties of cast iron. For instance, in flake graphite cast irons the mechanical properties are low while the thermal conductivity is high. LÄS MER
2. Hygro-Elastic Deformation of High Pressure Laminates. A Macroscopic Analysis. Theoretical Modelling and Measurements
Sammanfattning : Deformation due to environmental changes in moisture arises in many engineering problems of practical interest. The purpose of this work is to develop a theoretical model for the determination of moisture induced deformations in thin plates made of High Pressure Laminates. LÄS MER
3. Torque and Angle Controlled Tightening of Bolted Joints
Sammanfattning : Reduced weight and fuel consumption, improved reliability and engine performance are the main requirements in the automotive industry of today. These requirements demand robust and optimized bolted joints, where a high amount of preload obtained by effective utilisation of the bolt is essential. LÄS MER
4. The influence of graphite morphology on the elastic behaviour of cast irons
Sammanfattning : The morphology of the graphite phase largely controls the resulting properties of different grades of cast iron. In flake graphite cast irons, the mechanical properties are low while the thermal conductivity is high. In contrast, with spheroidal graphite cast irons, the mechanical properties are high while the thermal conductivity is low. LÄS MER
5. On the deformation behavior and cracking of ductile iron; effect of microstructure
Sammanfattning : This thesis focuses on the effect of microstructural variation on the mechanical properties and deformation behavior of ductile iron. To research and determine these effects, two grades of ductile iron, (i) GJS-500-7 and (ii) high silicon GJS-500-14, were cast in a geometry containing several plates with different section thicknesses in order to produce microstructural variation. LÄS MER