Sökning: "crack-tip"

Visar resultat 1 - 5 av 66 avhandlingar innehållade ordet crack-tip.

  1. 1. Crack tip modelling in paper

    Författare :Petri Mäkelä; KTH; []
    Nyckelord :;

    Sammanfattning : .... LÄS MER

  3. 2. Modelling of fracture toughness using peridynamics : A Study of J-integral, essential work and homogenisation

    Författare :Christer Stenström; Pär Jonsén; Kjell Eriksson; Ugo Galvanetto; Luleå tekniska universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Peridynamics; J-integral; Essential work of fracture; Nonlocal methods; Meshless; Meshfree; Fracture; Crack tip; Exact analytical; Center cracked tension; Double edge notched tensile; fracture toughness; Peridynamik; Brottmekanik; Sprickspets; Brottseghet; Spänningsintensitet; Hållfasthetslära; Solid Mechanics;

    Sammanfattning : Fracture toughness is one of the most important properties of a material. Being able toaccurately estimate the energy that goes into forming new crack surfaces is essential for the development of new materials, quality assurance, structural monitoring and failure analysis. LÄS MER

  4. 3. On failure modelling in finite element analysis : material imperfections and element erosion

    Författare :Mattias Unosson; Larsgunnar Nilsson; Kjell Simonsson; Lars Olovsson; Anders Eriksson; Linköpings universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; finite element method; element erosion; material failure; material imperfections; crack-tip; Solid mechanics; Fastkroppsmekanik;

    Sammanfattning : This dissertation concerns failure modelling with material imperfections and element erosion in finite element analyses. The aim has been to improve the element erosion technique, which is simple to use and implement and also computationally inexpensive. LÄS MER

  5. 4. Weakening of Crack-tip Singularity due to Buckling of Thin Bodies under Tension

    Författare :Li Chong; Hållfasthetslära; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Thin foils; Fracture; Buckling;

    Sammanfattning : When thin sheets containing a crack is subjected to tensile loading in the direction perpendicular to the crack surface out of plane displacement will occur in areas surrounding the crack. By this the stress state in the vicinity of the crack tip is changed and leads to a weaker crack tip singularity than the r-1/2 by linear elastic fracture mechanics. LÄS MER

  7. 5. Oxygen Induced High Temperature Crack Growth in Ni-base Superalloys

    Författare :Leif Viskari; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Diffusion; Environmental influence; Crack growth; Atom probe tomography; Electron Microscopy; Deformation; Crack tip oxidation; Hold-time fatigue;

    Sammanfattning : Oxygen induced crack growth is a serious concern for the performance of Ni-base superalloys. These alloys are used in gas-turbine engines where they are exposed to hightemperatures, mechanical loads and oxygen-rich environments. LÄS MER