Sökning: "crack growth rate"

Visar resultat 1 - 5 av 64 avhandlingar innehållade orden crack growth rate.

  1. 1. High Strain Fatigue Crack Growth and Crack Closure

    Författare :Michael Andersson; Materialteknik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; materialteknik; Materiallära; Material technology; crack closure; high strain fatigue; crack grotwh;

    Sammanfattning : Understanding of the growth of fatigue cracks is of utmost importance since such growth often has a profound influence on the life of components subjected to cyclic loading. Thus, reliable fatigue life models enable a more efficient use of materials and improve the performance and efficiency in many applications. LÄS MER

  3. 2. Crack growth paths in rolling contact fatigue — Numerical predictions

    Författare :Mohammad Salahi Nezhad; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Vector crack tip displacement; Crack face friction; Crack growth direction; Crack propagation; Rolling contact fatigue;

    Sammanfattning : Rolling contact fatigue (RCF) cracks in railway wheels and rails are costly and complex to deal with. Despite the extensive research efforts that have been put into understanding the mechanisms and developing appropriate predictive models for RCF crack growth, there are still a lot of open questions. LÄS MER

  4. 3. Numerical Modelling of Short Fatigue Crack Growth

    Författare :Per Hansson; Mekanik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; discrete dislocation; Fatigue; grain boundary; short crack;

    Sammanfattning : Fatigue implies repeated loading and unloading of a structure, and components subjected to fatigue might experience nucleation of cracks, and subsequent crack propagation. This might lead to catastrophic consequences, such as complete failure of a structure. LÄS MER

  5. 4. Strain-assisted corrosion cracking and growth rate inhibitors

    Författare :Andrey P Jivkov; Mekanik; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; vacuum technology; vibration and acoustic engineering; Maskinteknik; hydraulik; vakuumteknik; vibrationer; akustik; materialteknik; Mechanical engineering; Material technology; Materiallära; Stress intensity factor; Inhomogeneous materials; Crack evolution; Stress corrosion cracking; Moving boundary; hydraulics;

    Sammanfattning : A model for evolution of cracks as a result of strain-assisted corrosion is presented. The considered cracks possess a realistic geometry, where the tip region is an integral part of the crack surface instead of being a singular point. This geometry is either implicitly defined or is a consequence of crack nucleation from surface irregularities. LÄS MER

  7. 5. Growth of fatigue cracks subjected to non-proportional Mode I and II

    Författare :Peter Dahlin; Mårten Olsson; Veronique École; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fatigue crack growth; Mode II overloading; Crack closure; Sequential mixed mode loading; Other engineering mechanics; Övrig teknisk mekanik;

    Sammanfattning : This thesis deals with some aspects of crack growth in the presence of cyclic loading, i.e. fatigue. The cyclic load cases studied here are primary of non-proportional mixed mode type. LÄS MER