Sökning: "building ventilation"

Visar resultat 1 - 5 av 126 avhandlingar innehållade orden building ventilation.

1. 1. Potential of Ventilation Radiators : Performance evaluation by numerical, analytical and experimental means

   Författare :Jonn Are Myhren; Sture Holmberg; Per Olaf Tjelflaat; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Ventilation radiator; thermal comfort; exhaust ventilation; CFD; energy saving; convection fin; low temperature heating; Building engineering; Byggnadsteknik;

   Sammanfattning : Energy consumption for heating and ventilation of buildings is still in 2011considered far too high, but there are many ways to save energy and construct lowenergy buildings that have not been fully utilised. This doctoral thesis has focused onone of these - low temperature heating systems. LÄS MER

3. 2. Natural Ventilation and Air Infiltration in Large Single‑Zone Buildings : Measurements and Modelling with Reference to Historical Churches

   Författare :Abolfazl Hayati; Magnus Mattsson; Mats Sandberg; Jens Fransson; Guilherme Carrilho da Graça; Högskolan i Gävle; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Natural ventilation; Airing; Air infiltration; Single-sided ventilation; Cross flow; Large single zones; Historical Churches; Model evaluation optimization; Field measurements; Wind tunnel; Indoor climate and Energy simulation; IDA-ICE; Tracer gas technique; Pressurization test.; Naturlig ventilation; Vädring; Luftinfiltration; Ensidig ventilation; Tvärdrag; Höga en-zonsbyggnader; Kulturhistoriska kyrkor; Modellutvärdering optimering; Fältmätningar; Vindtunnel; Inomhusklimat och energisimulering; IDA-ICE; Spårgas teknik; Trycksättningstest.; Hållbar stadsutveckling; Sustainable Urban Development;

   Sammanfattning : Natural ventilation is the dominating ventilation process in ancient buildings like churches, and also in most domestic buildings in Sweden and in the rest of the world. These buildings are naturally ventilated via air infiltration and airing. LÄS MER

4. 3. Ventilation and window opening in schools, Experiments and Analysis

   Författare :Birgitta Nordquist; Avdelningen för Installations- och klimatiseringslära; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; heat exchanger efficiency; duct design; balancing; disturbance; tracer gas measurements; analytical model; window opening; single-sided ventilation; ventilation; schools; sensitivity analysis; Building construction; Byggnadsteknik;

   Sammanfattning : The objective of this thesis is to study the application of ventilation in schools buildings. A number of studies of the application of different forms of ventilation are presented. The main part of the thesis focuses on window opening in a classroom. Analytical models for calculation of the air change caused by window airing are proposed. LÄS MER

5. 4. Heat Flow in Building Components, Experiment and Analysis

   Författare :Petter Wallentén; Institutioner vid LTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; radiation exchange; longwave; shortwave; transient; frequency analysis; finite difference; measurements; wall; window; heat transfer coefficient; convective; full scale; natural climate; in situ; counter flow insulation; heat transfer; dynamic insulation; temperature; building; solar radiation; window model; Building construction; Byggnadsteknik;

   Sammanfattning : Three building components exposed to natural climate were studied: a dynamic insulation in the ceiling of a house, an outer wall and one window in the same wall. The term dynamic insulation implies that part of the inlet or exhaust air passes through the insulation of a house. LÄS MER

7. 5. Thermal models of buildings : determination of temperatures, heating and cooling loads : theories, models and computer programs

   Författare :Kurt Källblad; Institutionen för byggvetenskaper; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Building construction; Computer Programs; Windows; Infiltration; Comfort; Walls; Indoor Climate; Climate; Ventilation; Cooling Load; Heating Load; Buildings; Thermal Models; Building Physics; Energy; Byggnadsteknik;

   Sammanfattning : The need to estimate indoor temperatures, heating or cooling load and energy requirements for buildings arises in many stages of a buildings life cycle, e.g. at the early layout stage, during the design of a building and for energy retrofitting planning. Other purposes are to meat the authorities requirements given in building codes. LÄS MER