Sökning: "Operational dynamic parameters"

Visar resultat 1 - 5 av 46 avhandlingar innehållade orden Operational dynamic parameters.

  1. 1. Dynamic Power System Load -Estimation of Parameters from Operational Data

    Författare :Ines Romero; Industriell elektroteknik och automation; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; control engineering; robotics; Automation; large disturbances; Load modeling; normal operation; voltage stability; dynamic load models; modeling and identification; normalization in reactive load models; Elektronik och elektroteknik; Electronics and Electrical technology; Automatiska system; robotteknik; reglerteknik; Electrical engineering; Elektroteknik;

    Sammanfattning : The significance of load modeling for voltage stability studies has been emphasized by several disturbances, which have taken place in the past years. They have shown that the loads in combination with other dynamics are among the main contributors of prolonged low voltage conditions, voltage instability and collapse in the power system. LÄS MER

  3. 2. Estimation of Machining System Dynamic Properties - Measurement and Modelling

    Författare :Tomas Österlind; Andreas Archenti; Mihai Nicolescu; Leif Kari; Amir Rashid; Thomas Abrahamsson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Machining system; Operational dynamic parameters; Displacement map; Contactless excitation and response system; SRA - Production; SRA - Produktion; Production Engineering; Industriell produktion;

    Sammanfattning : Dynamic characteristics of machining systems are analysed for improved understanding of both structural and process properties. The thesis stresses the use of testing methods under operational like conditions as these are more representative of closed loop systems, such as machining systems, as compared to conventional testing methods. LÄS MER

  4. 3. Surface defects in rails - Potential influence of operational parameters on squat initiation

    Författare :Robin Andersson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; RCF; squats; dynamic vehicle–track interaction; rail corrugation; Rail surface irregularities;

    Sammanfattning : Despite significant efforts throughout the last decades, the mechanisms behind the formation of squats — a form of rolling contact fatigue (RCF) damage in rails — are not fully understood. Proposed causes of initiation involve, but are not limited to, small initial rail surface irregularities which yield high contact stresses, rail corrugation and varying friction conditions. LÄS MER

  5. 4. Modelling and Simulation of Dynamic Behaviour in Crushing Plants

    Författare :Gauti Asbjörnsson; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Crushing; Dynamic Simulation; Modelling; Screening;

    Sammanfattning : Crushing plants are a vital part in the production of aggregates and metals. Plants are traditionally simulated with a steady-state simulation. With steady-state simulation the plant is simulated until equilibrium is achieved. LÄS MER

  7. 5. Dynamic Load Models for Power Systems - Estimation of Time-Varying Parameters During Normal Operation

    Författare :Ines Romero; Industriell elektroteknik och automation; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; voltage stability; Load modeling; modeling and identification; dynamic load models; normalization in reactive load models;

    Sammanfattning : Economic and environmental concerns will slow down the expansion of the transmission system in many countries. The addition of new transmission lines will be few and far between. The de-regulation of the power supply will introduce new power flow patterns on the bulk transmission systems. LÄS MER