Sökning: "Nickel based superalloys"

Visar resultat 21 - 25 av 48 avhandlingar innehållade orden Nickel based superalloys.

1. 21. Aspects of Crack Growth in Single-Crystal Nickel-Base Superalloys

   Författare :Christian Busse; Daniel Leidermark; Kjell Simonsson; Johan Moverare; David Gustafsson; Björn Sjödin; Louis J. Ghosn; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : This Licentiate of Engineering thesis is a product of the results generated in the research project KME-702, which comprises modelling, microstructure investigations and material testing of cast nickel-base superalloys.The main objective of this work is to model the fatigue crack propagation behaviour in single-crystal nickel-base superalloys. LÄS MER

3. 22. High temperature performance of materials for future power plants

   Författare :Junjing He; Pavel Korzhavyi; Rolf Sandström; Stefano Spigarelli; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Austenitic stainless steels; Nickel based superalloys; Low cycle fatigue; Creep-fatigue; Creep cavitation; Grain boundary sliding; Cavity nucleation; Cavity growth; Creep rupture strength; Advanced ultra-supercritical power plants.; Teknisk materialvetenskap; Materials Science and Engineering;

   Sammanfattning : Increasing energy demand leads to two crucial problems for the whole society. One is the economic cost and the other is the pollution of the environment, especially CO2 emissions. Despite efforts to adopt renewable energy sources, fossil fuels will continue to dominate. LÄS MER

4. 23. Modelling of Crack Growth in Single-Crystal Nickel-Base Superalloys

   Författare :Christian Busse; Daniel Leidermark; Kjell Simonsson; Richard Neu; Linköpings universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY;

   Sammanfattning : This dissertation was produced at the Division of Solid Mechanics at Linköping University and is part of a research project, which comprises modelling, microstructure investigations and material testing of cast nickel-base superalloys. The main objective of this work was to deepen the understanding of the fracture behaviour of single-crystal nickel-base superalloys and to develop a model to predict the fatigue crack growth behaviour. LÄS MER

5. 24. Modelling Aspects in Forming and Welding of Nickel-Base Superalloys

   Författare :Lluís Pérez Caro; Mats Oldenburg; Eva-Lis Odenberger; Juan Carlos Cante Teran; Luleå tekniska universitet; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; alloy 718; Haynes 282; cold forming; hot forming; material characterization; GISSMO; welding; heat treatment; manufacturing chain; springback; shape distortions; dynamic strain aging; DSA; microstructure; Hållfasthetslära; Solid Mechanics;

   Sammanfattning : The reduction of fuel consumption and carbon dioxide emissions are currently a key factor for the aviation industry because of major concerns about climate change and more restrictive environmental laws. One way to reduce both fuel consumption and CO2 emissions is by significantly decreasing the weight of vehicles while increasing the efficiency of the engine. LÄS MER

7. 25. Processability of Laser Powder Bed Fusion of Alloy 247LC-Influence of process parameters on microstructure and defects

   Författare :Olutayo Adegoke; Joel Andersson; Robert Pederson; Moataz Attallah; Högskolan Väst; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Laser powder bed fusion; Alloy 247LC; additive manufacturing; nickel-based superalloys; processability; cracks; voids; Laserpulverbäddssmältning; legering 247LC; additiv tillverkning; superlegeringar; processbarhet; sprickor; porositet.; Production Technology; Produktionsteknik;

   Sammanfattning : This thesis is about laser powder bed fusion (L-PBF) of the nickel-basedsuperalloy Alloy 247LC. Alloy 247LC is mainly used in gas turbine blades and processing the blades with L-PBF may confer performance advantage over the blades manufactured with conventional methods. LÄS MER