Sökning: "Multi-phase"

Visar resultat 1 - 5 av 65 avhandlingar innehållade ordet Multi-phase.

  1. 1. Deformation mechanisms and load distribution in multi-phase engineering materials

    Författare :Nitesh Raj Jaladurgam; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Deformation mechanisms; Electron microscopy; Eutectic high entropy alloys; Load distribution; Superalloys; In-situ neutron diffraction;

    Sammanfattning : While the transition to carbon neutral technologies is still in progress, it is vital to reduce the environmental impact of existing processes. The efficiency of combustion processes for e.g. power generation and aviation can be greatly improved by increasing the operating temperature. LÄS MER

  3. 2. The Finite Difference Methods for Multi-phase Free Boundary Problems

    Författare :Avetik Arakelyan; Henrik Shahgholian; John W. Barrett; KTH; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; MATHEMATICS; MATEMATIK;

    Sammanfattning : This thesis consist of an introduction and four research papers concerning numerical analysis for a certain class of free boundary problems. Paper I is devoted to the numerical analysis of the so-called two-phase membrane problem. Projected Gauss-Seidel method is constructed. LÄS MER

  4. 3. Modeling and Simulation of a Multi Phase Semi-batch Reactor

    Författare :Anna Nyström; Göteborgs universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; semi-batch reactor; modeling; simulation; optimization; simulation;

    Sammanfattning : The operation of an industrial semi-batch reactor is modeled and the flow of one reactant is investigated. In the reactor a strongly exothermic polymerization reaction takes place followed by a slightly exothermic reaction, and the objective is to minimize the duration of the operation of the process. LÄS MER

  5. 4. Numerical simulation of multi-scale transport processes and reactions in pem fuel cells using two-phase models

    Författare :Munir Khan; Jinliang Yuan; Bengt Sundén; Värmeöverföring; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; numerical analysis; multi-scale; multi-phase; reacting flows; multi-component;

    Sammanfattning : A numerical study for the cathode of a PEM fuel cell has been performed in this study. The results have been limited to cathode only because, in PEM fuel cells, the oxygen reduction reactions, ORRs, are considered the rate limiting reactions and govern the fuel cell performance. LÄS MER

  7. 5. Component and system design of a mild hybrid 48 V powertrain for a light vehicle

    Författare :Stefan Skoog; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Extra low voltage; Hybrid Electric Vehicle; 48 V; Li-ion battery; Calorimetric measurement; Oil cooling; Efficiency; Multi-phase; MOSFET; Power Electronics; Permanent Magnet Synchronous Machine; PWM; Inverter; Power density;

    Sammanfattning : This thesis presents contributions in three areas relevant for the development of 48 V mild hybrid electric powertrains for cars. The first part comprises methodologies and extensive testing of lithium-ion battery cells in order to establish the electric and thermal performance using equivalent circuit models. LÄS MER