Sökning: "Germanium"

Visar resultat 1 - 5 av 78 avhandlingar innehållade ordet Germanium.

  1. 1. Ge/high-k Gates for Monolithic 3D Integration

    Författare :Laura Zurauskaite; Per-Erik Hellström; Mikael Östling; Francois Andrieu; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Germanium; high-k; monolithic; 3D; germanium on insulator; GOI; germanium oxide; GeOx; Si-cap; Si-passivation; interface state density; Dit; low temperature; MOSFET; germanium; hög-permittivitetsdielektrika; monolitisk; 3D; germaniumpå- isolator; GOI; germaniumoxid; GeOx; kiselskikt; kiselpassivering; gränssnittsfälltäthet; Dit; låg temperatur; MOSFET; Informations- och kommunikationsteknik; Information and Communication Technology;

    Sammanfattning : Continuous scaling of transistor dimensions has been in the heart of semiconductorindustry for many years. Recently the scaling has been enabled by various performance boosters which resulted in increased processing complexity and cost, forcing the chip manufacturers to look for some alternative solutions. LÄS MER

  3. 2. Germanium layer transfer and device fabrication for monolithic 3D integration

    Författare :Ahmad Abedin; Mikael Östling; Cor Claeys; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Monolithic; sequential; 3D; silicon; germanium; wafer bonding; etch back; germanium on insulator; GOI; Ge pFET; low temperature; Sipassivation; pn junction; Kisel; germanium; epitaxi; selektiv; pn-övergång; germanium påisolator; GOI; Ge PFET; bonding; monolitisk; sekventiell; tre dimensionell; 3D; lågtemperarad;

    Sammanfattning : Monolithic three-dimensional (M3D) integration, it has been proposed,can overcome the limitations of further circuits’ performance improvementand functionality expansion. The emergence of the internet of things (IoT) isdriving the semiconductor industry toward the fabrication of higher-performancecircuits with diverse functionality. LÄS MER

  4. 3. Silicon Germanium heterojunction bipolar transistors : Large-signal modeling and low-frequency noise characterization aspects

    Författare :Staffan Bruce; Uppsala universitet; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Materials science; Silicon Germanium; SiGe; Heterojunction Bipolar Transistor; HBT; Large-signal modeling; thermal time constant; low-frequency noise: coherence; transimpedance amplifier; Materialvetenskap; Materials science; Teknisk materialvetenskap; Elektronik; Electronics;

    Sammanfattning : In this thesis, aspects of the Silicon Germanium (SiGe) Heterojunction Bipolar Transistor (HBT) are addressed. A physics-based electrical large-signal model including thermal dependence has been developed and is implemented using a commercially available simulator package. LÄS MER

  5. 4. Applications of Si1-xGex alloys for Ge devices and monolithic 3D integration

    Författare :Konstantinos Garidis; Per-Erik Hellström; Mikael Östling; Sten Vollebregt; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Silicon; germanium; epitaxy; selective; pn junction; germanium on insulator; GOI; Ge PFET; bonding; monolithic; sequential; three dimensional; 3D; low temperature; Informations- och kommunikationsteknik; Information and Communication Technology;

    Sammanfattning : As the semiconductor industry moves beyond the 10 nm node, power consumption constraints and reduction of the negative impact of parasitic elements become important. Silicon germanium (Si1−xGex) alloys have been used to amplify the performance of Si based devices and integrated circuits (ICs) for decades. LÄS MER

  7. 5. Novel Possibilities for Advanced Molecular Structure Design for Polymers and Networks

    Författare :Anna Finne; KTH; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; ring-opening polymerization; coordination-insertion; germanium; cyclic tin alkoxides; spirocyclic initiators; poly L-lactide ; poly 1; 5-dioxepan-2-one ; triblock; star-shaped; network; functionalization; morphology; AFM; Polymer chemistry; Polymerkemi;

    Sammanfattning : Synthetic and degradable polymers are an attractive choicein many areas, since it is possible to control the way in whichthey are manufactured; more specifically, pathways tomanipulate the architecture, the mechanical properties and thedegradation times have been identified. In this work,L-lactide, 1,5-dioxepan-2-one and ε-caprolactone were usedas monomers to synthesize polymers with different architecturesby ring-opening polymerization. LÄS MER