Sökning: "Galling"
Visar resultat 1 - 5 av 22 avhandlingar innehållade ordet Galling.
1. The early stage of galling
Sammanfattning : In sheet metal forming (SMF) of materials such as stainless steels there is a major problem with transfer and accumulation of sheet material to the metal forming tool surface. The problem is known as galling; a kind of severe adhesive wear, which results in severe scratching of produced parts. LÄS MER
2. On Adhesion and Galling in Metal Forming
Sammanfattning : Metal forming is widely used in the industry to produce cans, tubes, car chassis, rods, wires etc. Forming certain materials such as stainless steel, aluminium and titanium, is often difficult, and problems associated with transfer of work material to the tool material are frequent. LÄS MER
3. High temperature galling : influencing parameters and mechanisms
Sammanfattning : Damage of forming tools at elevated temperatures is a major problem in metal forming processes such as hot stamping. Of special importance is the occurrence of adhesion and gross material transfer from the work-piece to the tool surface, a phenomenon known as galling. LÄS MER
4. The influence of tool steel microstructure on galling
Sammanfattning : In sheet metal forming (SMF) of materials such as stainless steels there is a major problem with transfer and accumulation of sheet material to the metal forming tool surface. The problem is known as galling; a sort of severe adhesive wear, which results in severe scratching of produced parts. LÄS MER
5. Galling of high strength steels and stainless steels in sheet metal forming as evaluated using pin-on-disc testing
Sammanfattning : The thesis focuses on the problem galling in sheet metal forming operations. Galling occurs when sheet metal transfers from the sheet surface onto the tool surface and causes surface damages to following sheets in the forming operation. When this happens the tool must be replaced causing production stops and additional expenses. LÄS MER