Sökning: "Dynamic Fracture Mechanics"
Visar resultat 1 - 5 av 27 avhandlingar innehållade orden Dynamic Fracture Mechanics.
1. Non-Linear Vibration and Dynamic Fracture Mechanics of Bridge Cables
Sammanfattning : In the present work, the non-linear vibrations and the corresponding dynamic fracture mechanics of cables of cable-stayed bridges are studied. The cables are among the most critical components in cable-stayed bridges and there are different damage sources such as corrosion, vibration, fatigue and fretting fatigue that can significantly affect them, thereby reducing the cable’s service life and even producing their failure. LÄS MER
2. Simulation of dynamic instabilities during high rate deformation of ductile bars and plates
Sammanfattning : In this thesis, some of the phenomena occurring in plates and cylindrical bars subjected to dynamic loading are investigated. Numerical simulations using a dynamic finite element code are performed for a number of different sized specimens with various initial surface imperfections. Typically imposed loading velocities are in the range 10m/s.. LÄS MER
3. Heterogeneous Bonded Particle Modelling of Rock Fracture
Sammanfattning : The dynamic fracture process of rock materials is of importance for several industries, such as the rock drilling process in geothermal and mining applications. Gaining knowledge and understanding of dynamic rock fracture through numerical simulations can enhance the rock drilling process, for example by optimising the drill bit geometry and drilling parameters. LÄS MER
4. Modeling of fracture and damage in rubber under dynamic and quasi-static conditions
Sammanfattning : Elastomers are important engineering materials that have contributed to the different technical developments and applications since the 19th century. The study of crack growth mechanics for elastomers is of great importance to produce reliable products and therefore costly failures can be prevented. LÄS MER
5. Modeling of cast iron materials related to machining
Sammanfattning : A microstructure level simulation model of cast iron machining based on micrograph image analysis has been developed. The simulation tool has been developed for theorthogonal machining process involving 2D representations of a range of cast iron microstructures. LÄS MER