Sökning: "Bainitic transformation"

Visar resultat 1 - 5 av 10 avhandlingar innehållade orden Bainitic transformation.

  1. 1. Microscopy and microanalysis of bainitic weld metal

    Författare :Bertil Josefsson; Chalmers tekniska högskola; []
    Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; atom probe analysis; weld metal; phase transformation; dilatometry; microstructure; mechanical properties; bianite; electron microscopy; chromium-molybdenum steel;

    Sammanfattning : .... LÄS MER

  3. 2. Formation of Bainite Studied by In-situ High-energy X-ray Diffraction

    Författare :Sen Lin; Peter Hedström; Annika Borgenstam; Sébastien Allain; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Steel; Bainitic transformation; High-energy X-ray diffraction; Electron microscopy; Carbon diffusion; Thermodynamics and kinetics; Microstructure evolution; 高强钢; 贝氏体转变; 原位高能X射线衍射; 扫描与透射电子显微镜; 碳扩散; 热力学与动力学; 微观结构表征; Stål; Bainitiska fasomvandlingen; Högenergi-röntgendiffraktion; Elektronmikroskopi; Koldiffusion; Termodynamik och kinetik; Mikrostrukturutveckling; Materials Science and Engineering; Teknisk materialvetenskap;

    Sammanfattning :       Bainitic steels have attracted great attentions in recent years due to their excellent combination of properties to accommodate a wide range of applications. A deep and comprehensive understanding of how bainite forms is required to better design the production process and optimize the properties of bainitic steels. LÄS MER

  4. 3. Formation of Bainite in Steels

    Författare :Jiaqing Yin; Annika Borgenstam; Bevis Hutchinson; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Fe-C alloys; Bainitic transformation; Proeutectoid ferrite; Upper bainite; Lower bainite; Morphology; Steels.; Teknisk materialvetenskap; Materials Science and Engineering;

    Sammanfattning : A systematic survey of morphology of bainite and proeutectoid ferrite was carried out in order to validate some old thoughts of bainite transformation mechanism. It is confirmed that there is no morphological evidence supporting a sharp change neither between Widmanstätten ferrite and the ferritic component of upper bainite, nor between upper and lower bainite. LÄS MER

  5. 4. White Layer Formation during Hard Turning of Through-Hardened Martensitic and Bainitic AISI 52100 Steel

    Författare :Seyed Hosseini; Chalmers tekniska högskola; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; white layers; residual stresses; phase transformation; dynamic recovery; bainite; dynamic recrystallization; carbide deformation; retained austenite; steel; martensite;

    Sammanfattning : Increased demands for flexible manufacturing lines, shorter cycle times and reduced impact on the environment drives the need for optimization of today’s manufacturing. For machining of hardened steel parts (>45 HRC), grinding has been the obvious choice for many decades. However, hard turning has often been considered as a replacement due to e. LÄS MER

  7. 5. Thermal Stability and Mechanical Properties of Bainitic Steel

    Författare :Adam Ståhlkrantz; Annika Borgenstam; Peter Hedström; Niklas Sarius; Joacim Hagström; KTH; []
    Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; Bainite; Austempering; Low alloyed steel; Tempering; Variant pairing; Material characterization; Metallurgical process science; Metallurgisk processvetenskap; Materials Science and Engineering; Teknisk materialvetenskap;

    Sammanfattning : For material design it is important to understand and establish the relations between the processing of the steel, the resulting microstructure and how that correlate to the properties of the steel. The main focus of this thesis has been to increase this knowledge for low alloy bainitic steels with medium to high carbon content. LÄS MER