Sökning: "304L"

Visar resultat 1 - 5 av 24 avhandlingar innehållade ordet 304L.

1. 1. Alkali Induced Corrosion of 304L, The Influence of Potassium Salts and Water Vapour

   Författare :Jesper Pettersson; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; 304L; Alkali; Breakaway Corrosion; KCl; Oxidation; Deposit;

   Sammanfattning : This work investigates the influence of alkali salts on the oxidation of304-type (Fe18Cr10Ni) austenitic stainless steel in laboratory and fieldexposures. Stainless steel coupons were exposed isothermally inlaboratory furnaces at 400-600 °C in 5% O2 and 5% O2 + 40% H2O.Thermobalance exposures were also performed. LÄS MER

3. 2. The influence of SO2 on the high temperature corrosion of Fe and Fe-Cr alloys

   Författare :Anders Järdnäs; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; iron; H2O; high temperature corrosion; Fe-2.25Cr-1Mo steel; SO2; 304L; oxidation;

   Sammanfattning : Sulfur dioxide is an important pollutant in combustion gases and plays a major role in the high temperature corrosion of many metals and alloys. This work investigates the influence of small amounts of SO2 on the high temperature corrosion of iron, chromium and several Fe-Cr alloys. LÄS MER

4. 3. Alkali Induced High Temperature Corrosion of Stainless Steel - Experiences from Laboratory and Field

   Författare :Jesper Pettersson; Chalmers tekniska högskola; []
   Nyckelord :NATURVETENSKAP; NATURAL SCIENCES; NATURVETENSKAP; NATURAL SCIENCES; KCl; 304L; Biomass; Corrosion; Chlorine; Chromate; Waste; Deposit;

   Sammanfattning : The high temperature corrosion of steam superheaters is a major obstacle that has to be overcome in order to increase the electricity generating efficiency of power boilers burning biomass or waste. This thesis addresses this issue by a combination of well-controlled model experiments in the laboratory and short and long term field exposures using cooled probes in full-scale biomass and waste fired boilers. LÄS MER

5. 4. Microstructural Characterization of Expanded Austenite in 304L and 904L Austenitic Stainless Steels

   Författare :Giulio Maistro; Chalmers tekniska högskola; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; low-temperature thermochemical treatment; S-phase; SEM; thermal stability; surface engineering; surface analysis; EBSD; XRD; austenitic stainless steel; XPS; GDOES; Expanded austenite;

   Sammanfattning : Austenitic stainless steels are among the most used materials in modern industry, mainly because of their superior corrosion resistance. However, low hardness and poor tribological properties often restrict their applicability. LÄS MER

7. 5. A Study of EAF Austenitic and Duplex Stainless Steelmaking Slags Characteristics

   Författare :Saman Mostafaee; Margareta Andersson; Pär Jönsson; Nzotta Mselly; KTH; []
   Nyckelord :TEKNIK OCH TEKNOLOGIER; ENGINEERING AND TECHNOLOGY; EAF; Slag; Duplex steel; 304L stainless steel; Characterization; Microstructural evolution; Spinels; Basicity; Computational thermodynamics; Slag foaming; Metallurgical process and manufacturing engineering; Metallurgisk process- och produktionsteknik;

   Sammanfattning : The high temperature microstructure of the solid phases within the electric arc furnace (EAF) slag has a large effect on the process features such as foamability of the slag, chromium recovery, consumption of the ferroalloys and the wear rate of the refractory. The knowledge of the microstructural and compositional evolution of the slag phases during the EAF process stages is necessary for a good slag praxis. LÄS MER